TERMÉKISMERTETŠ2008(1)ENG.cdr - WEB-SET

Produced head typesDIN 28011-93:R = D; r = 0.1D; h1 ≥ 3.5s; h2 = 0.1935D–0.455sMSZ 1429/6: (The Hungarian Standard is invalid, but in case of demand heads can be produced with such aform.)R = D; r = 0.08D; h1 ≥ 3s; h2 = 0.181D–0.425sProducible sizes: Max. D = 4400; Max. s=25STorisphericalDIN 28013-93:R = 0.8D; r = 0.154D; h1 ≥ 3s; h2 = 0.255D–0.635sMSZ 1429/5: (The Hungarian Standard is invalid, but in case of demand heads can be produced withsuch a form.)R = 0.9D; r = 0.175D; h1 ≥ 3s; h2 = 0.252D–0.5sProducible sizes: Max. D = 3900; Max. s=50MSemi-ellipsoidalR = D; r ~ D/30; h1 ≥ 3s; h2 = 0.1534D–0.544s (r = 30; 50; 80; 100; 150)Producible sizes: Min. D = 1400; Max. D = 4500; Max. s=25NStandard-typeAxis ratio: 2:1 (According to ASME VIII. Div. 1, UG-32)R = 0.9(D-2s); r = 0.17(D-2s); h1 ≥ 3s; h2 = 0.25(D-2s)Axis ratio: 1.9:1 (According to NFE 81-103)R = (D-2s)/1.16; r = (D-2s)/5.39; h1 ≥ 3s; h2 = (D-2s)/3.8Producible sizes: Max. D = 4000; Max. s=25PEllipticalProducible sizes by pressing:D = 400 – 2800; s = 4 – 20; r=16–100(The thickness depends on the radius and on the diameter)Producible sizes by rolling:D = 1400 – 5000; s = 4 – 25 (depending on the diameter); r = 30, 50, 100, 150IFlat headPlate-type head:D1 = 26.9 – 3172; D2 = 70 – 3400; s=2–40(depending on the diameter;R=D1Convex disc (Plate-type head without rim D2 = D1):D1 = 26.9 – 4500; s=2–40(depending on the diameter); R=D1TPlate-type headGConvex discForming the cylindric part of the conemantle:D = 1400 - 4000; h ≤ 1000mm; d>400;s=6-25;h1≥3sNote:We do not produce the cone, it must be supplied by the orderer.QConeCap (According to DIN 2617): D=26.9-610;s=2.5-124W Cap Notes:Within the given dimension range not all forms areproducible. Ask for our offer!The letter codes are the the type-identifiers ofTechnokov Kft.

Required information for offering a tank headName examplesTorispherical head acc. to DIN 28011; outer dimeter1500 mm; nominal thickness 6 mm (min. 5.7 mm);edge preparation: square edge (I); materialquality:P265 GH:DIN 28011 - 1500 x 6 - I - P265 GH (EN 10028-2)Semi-ellipsoidal head acc. to DIN 28013; outerdiameter 1500 mm; minimum thickness 7.2 mm;edge preparation: V-edge outside 30º lemunkálva(VA); Materialquality P265 GH:DIN 28013 - 1500 x 7,2 MIN - VA - P265 GH (EN10028-2)Standard-type head; outer diameter 2500mm; smallradius 80 mm; starting thickness 7 mm; edgeunprepared (R); Materialquality S235 JRG2:NORMAL - 2500(r80) x7K-R-S235 JRG2 (EN10025)1. Form (standard definition): S - torispherical; M - semi-ellipsoidal; N - standard-type; P -ellipsoidal; etc.2. Main dimensions (ØD x s), D - diameter, it can be outer diameter or inner diameter (ID); s -thickness, it can be nominal (N), starting (K), or minimum (M)3. Height dimensions (h1, h3)4. Materialquality: EN 10025; EN 10028-2; EN 10028-3; EN 10028-7; etc. (In case of a hot-dipgalvanized product, please specify the requirements regarding the Si-content!)5. Material provider: Technokov Kft. or the Orderer. (In case the Orderer provides the material,please have respect to the relevant regulations of our General Contractual Conditions.)6. Welding: not allowed or allowed; welding technology according to customer's demands or bythe technology of Technokov.7. Testing the weld: visual test (VT); liquid-penetrant inspection (PT); magnetic particleexamination (MT); X-ray test (RT); ultrasonic test (UT). The extent of the test must be specifiedin %, and the requirements regarding the evaluation also has to be specified.8. Forming method: cold, hot, or defined by Technokov Kft.9. Heat-treatment: normalization; stress relieving; austenisation, or defined by Technokov Kft.Notes:The assortment of this product information includesonly the most important elements of the palette. Incase of a different request please ask for our offer!We keep several productypes continuously in stock.Regarding the products in stock please contant ourcolleagues at the sales department!10. Edge preparation: edge unprepared (R); square (I); V-edge outside 30º (VA); etc. (seeunder)11. Mechanical tests: no customer's prescription; Impact test at … ºC; Tensile test; Hot-tensiletest at … ºC; Intercrystalline corrosion test; Other12. Certification: EN 10204:2005-2.2; EN 10204:2005-2.3; EN 10204:2005-3.1; EN 10204:2005-3.2; EN 10204:2005-3.1+ AD2000; EN 10204/2005-3.2 + AD2000; EN 10204:2005-3.1 + PED;EN 10204:2005-3.2 + PED; OtherEdge preparations, joggled edgesR I VA VI DV 2/3 DVYAYIDYBABIThe signs are the same with those of Standards DIN28011 and DIN 28013.The sizes of „c” and „f” and the angles have to beagreed by placing the order.G-001 G-002 G-003 G-004—————————————————————————-The G-marked codes for joggled edge are the codes ofTechnokov Kft.Please indicate the thickness of the connecting mantle.Size range: D = 219 - 2500; s=3-95

Special pressings for vehicle industryHot pressing of different vehicle industry parts has a decade of tradition in the workshop of Technokov Kft. As a part of this activitywe produce bus parts (bumper parts, air-cushioning units), truck parts (axle housings, covers), and railway vehicle parts (bracing,anchor plates and frame units of person cars and freight cars).The type selection of the products is getting wider year by year.Apart of the Hungarian market we deliver more and more productsto foreign markets as well. We aspire to deliver our products in high processed level (e.g. blast cleaned, ready to be paintedsurface, ready to be installed, to be welded, edge preparations).The technical team of Technokov Kft. is open to execute any kind of customers' demand. With our colleagues experienced inproduct-, manufacturing-, and tool design in 2008 we started to bend different types of excavator parts, and still carry it out inenlarging selection.Elbow parts Segments for spherical tanks Compensator's elementsPressing of segments for large, multipartsheadsand spherical tanks.Various cuttings and holes for nozzlesin the tank head.6

Handhole and Manhole coversHandhole coverManhole coversWorking temperature: -10 ºC … +120 ºCWorking pressure: 6 … 50 barsR=5-12(depending on the working pressure)sF=4-10(depending on the working pressure)Materialquality of the ring and the cover:P265 GH (EN 10028-2) orS235 JRG2 (EN 10025)Working temperature: -10 ºC … +120 ºC Order units:Working pressure: 8 … 25 bar- Assembled unit (D)sR = 15 - 20 (depending on the working pressure) - Ring (U)sF = 6.1 -10.7 (depending on the working pressure) - Cover (Z)Materialquality of the ring and the cover:- Clip (Y)P265 GH (EN 10028-2) orS235 JRG2 (EN 10025)BOLDRINI production line7