Roller Chain - Tsubaki

More documents

Recommendations

Info

Anti-CorrosiveRoller ChainAn Introduction toTsubaki Anti-Corrosive Roller ChainsDrive ChainNP Nickel Plated Roller ChainNP is an RS Roller chain that has been plated with nickel. NP Chain has an attractive appearance and light corrosion resistance thatmakes it suitable for outdoor conditions where it is exposed to water. The maximum allowable load of nickel plated chain is 15% lessthan the equivalent RS roller chain.Nickel plated roller chain should not be used where the chain comes into direct contact with food products. Nor should it be usedwhere the nickel plated coating flakes may mix with and or contaminate food products. In non-food applications, a cover should beused where the coating flakes or wear dust may pose a problem.Nickel plated roller chain has magnetic properties.Working temperature range: +14˚F ˜ +140˚F.Ultra WP Roller ChainUltra WP is an RS Roller Chain that has undergone a special surface treatment (clips are type 301 stainless steel). This chain is morecorrosion-resistant in wet environments than NP chain, and is suitable for use in environments exposed to salt-water. The horsepowerratings are the same as RS Roller chain. Ultra WP roller chain has magnetic properties.Working temperature range: -22˚F ˜ +302˚FNeptune Roller ChainNeptune is RS Roller Chain that has been both zinc galvanized and specially treated on the surface with a coating that togetherprovide a double plated effect. (The surface treatment is applied to each individual part of the chain before it is assembled). Thishighly durable chain has superior corrosion resistance to salt-water and all types of weather. Tensile strength and maximum allowableload are identical to carbon steel RS Roller Chain.Neptune roller chain should not be used where the chain comes into direct contact with food products. In non-food applications, acover should be used where the coating flakes or where dust may pose a problem.Working temperature range: +14˚F ˜ +140˚F.SS Stainless Steel Roller ChainStainless Roller Chain is composed of type 304 stainless steel (clips are type 301). This chain is more corrosion resistant than RSRoller Chain, NP Roller Chain and Ultra WP Roller Chain. It can be used in special environments such as corrosive conditionsunderwater and in acids/alkalis. It is non-magnetic, though it may have some magnetic properties at low operating temperatures.Working temperature range: -4˚F ˜ +752˚F.NS Stainless Steel Roller ChainThis is a roller chain made from type 316 stainless steel (note that clips on the RS25NS size use type 301). The NS Stainless SteelRoller chain has the greatest corrosion resistant properties of all of Tsubaki’s stainless steel roller chain products. It has the highestresistance to extreme temperatures and has very low magnetic permeability.Working temperature range: -4˚F ˜ +752˚FA-68
Anti-CorrosiveRoller ChainAn Introduction toTsubaki Anti-Corrosive Roller ChainsAS Stainless Steel Roller ChainThis roller chain uses heat-treated hardened stainless steel (type 600) for the pins and rollers. The link plates and bushings aremade from type 304 stainless steel (clips are type 301). AS series chains are an excellent choice for drives requiring both corrosionresistance and high load capacity. Maximum allowable load is 50% greater than “SS” series Stainless Steel Roller Chain. Note thattype 600 stainless steel has magnetic properties.Working temperature range: -4˚F ˜ +752˚FPC Poly Steel ChainPoly-steel chain requires no lubrication, has greater wear resistance and is about 50% lighter than RS Roller Chain. This chain issuitable for maintenance free and sanitary environments. Poly-steel chain consists of an engineering plastic inner link and 304 typestainless steel pins and outer link plates. This chain can be used for both conveying and driving applications. It can accommodatestandard attachments.Working temperature range: -10˚F ˜ +176˚FFor more details on poly steel chains - including diagrams and specifications - please refer to the separate Plastic Roller Chainssection in this catalogue.Drive ChainTI Titanium Roller ChainTI chains are extremely lightweight (50% of the weight of carbon steel) and are made completely of titanium, making it both nonmagneticand highly corrosion resistant.Working temperature range: -4˚F ˜ +752˚FA-69
Page 1 and 2:
TSUBAKIDRIVE CHAINContentsPageRolle
Page 3 and 4:
Introduction toTsubaki Roller Chain
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Roller Chain Structure2. Assembly P
Page 11 and 12:
3/8”PitchANSI StandardRoller Chai
Page 13 and 14:
Page 15 and 16:
Page 17 and 18: 1”PitchANSI StandardRoller ChainR
Page 19 and 20: 1 1/2”PitchANSI StandardRoller Ch
Page 21 and 22: 2”PitchANSI StandardRoller ChainR
Page 23 and 24: 2 1/2”PitchANSI StandardRoller Ch
Page 25 and 26: Agricultural Roller ChainAn economi
Page 27 and 28: Agri-Tuff Roller ChainDouble PitchA
Page 29 and 30: Lambda (Lube-Free)Roller ChainCarbo
Page 31 and 32: X-Lambda (Lube-Free)Roller ChainX-L
Page 33 and 34: Lambda and X-LambdaRoller ChainHors
Page 35 and 36: V-ClassRoller ChainAn introduction
Page 37 and 38: V-ClassRoller ChainAll dimensions i
Page 39 and 40: Energy SeriesOil Field ChainStronge
Page 41 and 42: Energy SeriesOil Field ChainEnergy
Page 43 and 44: Energy SeriesOil Field ChainEnergy
Page 45 and 46: SpeedMasterRoller ChainSpeedMaster
Page 47 and 48: Heavy Duty Roller ChainComparison o
Page 49 and 50: Heavy Duty Roller ChainSuper Series
Page 55 and 56: THeavy Duty Roller ChainSuper-H Ser
Page 57 and 58: MiniatureRoller ChainDrive ChainAn
Page 59 and 60: 3/16”PitchMiniatureChainRS15Tsuba
Page 61 and 62: British Standard/DINRoller ChainDri
Page 63 and 64: British Standard/DINRoller ChainLam
Page 65 and 66: British Standard/DINRoller ChainNic
Page 67: British Standard/DIN ChainDrive Sel
Page 71 and 72: Anti-CorrosiveRoller ChainNeptuneAn
Page 73 and 74: Anti-CorrosiveRoller ChainStainless
Page 75 and 76: Anti-CorrosiveRoller ChainNickel Pl
Page 77 and 78: Anti-CorrosiveRoller ChainStainless
Page 79 and 80: Leaf ChainLEAF CHAIN SELECTION GUID
Page 81 and 82: Leaf ChainAL TypeLeaf ChainL1Chain
Page 83 and 84: Leaf ChainBL TypeLeaf ChainConnecti
Page 85 and 86: Specialty ChainLow Noise (SN)Specia
Page 87 and 88: ASpecialty ChainLaminated Block Cha
Page 89 and 90: Roller Chain ToolsChain Cutting Too
Page 91 and 92: Drive Chain SelectionData required
Page 93 and 94: Drive Chain Selection4. Selection F
Page 95 and 96: Drive Chain SelectionAll of the cha
Page 97 and 98: Drive Chain SelectionExample based
Page 99 and 100: Drive Chain SelectionExample based
Page 101 and 102: Drive Chain Selection8. Selection M
Page 103 and 104: Drive Chain SelectionProcedure 3: (
Page 105 and 106: Drive Chain Selection9. Selection b
Page 107 and 108: Roller ChainInstallation & Maintena
Page 119 and 120:
Roller ChainInstallation & Maintena
Page 121 and 122:
Roller ChainInstallation & Maintena
Page 123 and 124:
How to OrderRoller Chain1. Example
Page 125 and 126:
A-125Drive ChainNo.ofPitchesRS251/4
Page 127:
Warning!WARNINGUSE CARE TO PREVENT
show all

Roller Chain - Tsubaki

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?