Volume Replicator 5.0 Release Notes - Storage Foundation ...

Veritas Volume Replicator Release Notes 21Software limitationsVVR VEA issuesAfter migration, the Secondaries tab does not show information aboutthe Secondary (575992)In some cases, after you migrate the Primary role to the Secondary, theSecondaries tab does not show the information about the Secondary RVG. TheRVG, SRL and Data Volume information may be blank.Workaround: To display the information, navigate to the Summary tab and thenselect the Secondaries tab again.Associate Volume wizard shows associated volume sets (612927)The Associate Volume wizard may show volume sets that are already associatedto an RVG. A volume set cannot be associated to multiple RVGs.Secondary disk group view may not display correctly (615834)In a shared disk group environment, in some cases, clicking on the link for aSecondary disk group may not display the view of the disk group. This mayhappen if the Secondary cluster contains a deported disk group with the samename as the imported disk group. Clicking on the link may show the view for thedeported disk group.Workaround: If possible, remove the deported disk group with the same name.To avoid the problem, make sure disk group names are unique.Volume sizes display incorrectly when replicating between VVR versionson HP-UX (612565)The VVR VEA GUI may display the sizes of the SRL and data volumesincorrectly for an RDS replicating between VVR 4.1 and VVR 5.0 on the HP-UXoperating system.Overview views display incorrect layout and mirror information forcertain volume layouts (600485)For volumes with the layouts concatenated mirrored or mirrored concatenated,the overview views of the Primary and Secondary RVGs show the layoutincorrectly as concatenated. The number of mirrors may also be incorrect.Software limitationsUnsupported Internet protocol versionsVVR does not support IPv6. All nodes in a VVR environment must use IPv4.