Volume Replicator 5.0 Release Notes - Storage Foundation ...

20 Veritas Volume Replicator Release NotesKnown issuesthe Secondary receives an IBC while the snapshot is being taken on the Primary,vxconfigd may hang on the Secondary. Workaround: Specify the cache attribute instead of the cachesize attributeto the vradmin verifydata command.Restoring snapshots when the logowner is the slave nodeIn rare cases, when the logowner is the slave node, the vxrvg snaprestorecommand may result in data corruption on the Primary volume. After the restore command completes, the data volumes are resynchronized to the snapshot volumes in the background. The problem occurs if the applicationperforms I/O to the data volumes during this resynchronization. To avoid the problem, avoid doing application I/O until the background resynchronization completes. To view the status of the resynchronization, do the following:1 To display the taskid and the type, use the following command:# vxtask -g dgname list2 To track the progress of the task, use the following command:# vxtask -g dgname monitor taskidSee the vxtask manual page for more information.VRW issuesPrimary RVG in a private disk group on a master not displayed (615758)If a CVM master node contains a private disk group, a Primary RVG created inthat disk group is not displayed in the VVR Web GUI.Workaround: use the VVR command line or the VVR VEA GUI to view the RVG.Volume sizes display incorrectly when replicating between VVR versionson HP-UX (603945)The VVR Web GUI may display the sizes of the SRL and data volumesincorrectly for an RDS replicating between VVR 4.1 and VVR 5.0 on the HP-UXoperating system.In a CVM cluster, Create Primary wizard does not display private diskgroups (615769)When you create a Primary with the VVR Web GUI while connected to themaster node of a CVM cluster, the Create Primary wizard does not displayprivate disk group names in the disk group selection list.Workaround: To create a Primary RVG in a private disk group on the masternode, use the VVR command line or the VVR VEA GUI.