TurboCAD Pro V15 - Understanding Workplanes
TurboCAD Pro V15 - Understanding Workplanes TurboCAD Pro V15 - Understanding Workplanes
Select the circle on the box and delete it.Select the box. Tab into the Inspector Bar and enter 0 in the X, Y and Z position fields. Press Enter tomove the box to a common location for all readers.With the box still selected, select Zoom Extents from the menu bar at the top of the TurboCAD desktop.Select the Fit Workplane to Window tool from the Workplane toolbar. Left mouse click in a clear areaof the drawing area to deselect the box.Switch to Right view.28
Because the default reference point of the box is at the center of the box, when the box was moved togrid location 0,0,0 the bottom of the box is no longer on the workplane, it is 1.75 inches below theworkplane. The box has moved, not the workplane so the workplane is now in the middle of the box,and consequently at the center of all three (X, Y, Z) axis'.Switch to Isometric SE view.Preparation for the next workplane tool explanation will now take place.Select the Rectangle tool from the Line toolbar.In a clear area of the drawing snap an 8 inch square to the grid using two G SEKE snaps.Press Space Bar to exit the tool.Select the new rectangle and note the relationship of the X, Y, Z handles to the world coordinate icon.They are the same. The square is on the X-Y plane.With the rectangle still selected, select the Copy in Place tool from the BCiTool_GM toolbar 1X (onetime).The only indication that a copy has been made is theusers knowledge that they have left mouse clicked thetool icon.29
- Page 5: Since this is a frequent need, many
- Page 11 and 12: Note the relationship to the world
- Page 13 and 14: Move the cursor downward and at the
- Page 15: Here on the front face of the large
Select the circle on the box and delete it.Select the box. Tab into the Inspector Bar and enter 0 in the X, Y and Z position fields. Press Enter tomove the box to a common location for all readers.With the box still selected, select Zoom Extents from the menu bar at the top of the <strong>TurboCAD</strong> desktop.Select the Fit Workplane to Window tool from the Workplane toolbar. Left mouse click in a clear areaof the drawing area to deselect the box.Switch to Right view.28
Change language