TurboCAD Pro V15 - Understanding Workplanes

More documents

Recommendations

Info

Like so. Note the grid change, the workplane indicator change and the UCS icon change. Note also thedirection of the Z indicator in the UCS icon. It is pointing up in this case.Switch to Front view. Note the workplane indicator location.Switch to Isometric SE view.Select the Cylinder tool from the 3D Object toolbar.N SEKE snap the first point of the circle to diagonal line on the top of the box. Move cursor to the left ashort distance and then left mouse click to place the second point. In progress below.Move the cursor upward and at the same time note the direction of Z on the UCS icon and the numbersin the Height field of the Inspector Bar. Z is pointing upward in which case the numbers in the Heightfield should be should be positive numbers, and they are.47
Move the cursor downward and at the same time note the direction of Z on the UCS icon and thenumbers in the Height field of the Inspector Bar. Z is pointing upward in which case the numbers in theHeight field should be negative numbers, and they are.The illustration below shows the positive / negative relationship of the coordinate system as it pertains toworkplanes.48
Page 5: Since this is a frequent need, many
Page 9 and 10: Because the default reference point
Page 11: Note the relationship to the world
Page 15: Here on the front face of the large

TurboCAD Pro V15 - Understanding Workplanes

Create successful ePaper yourself

Delete template?

Save as template?