Steering Pump Application Guide - CARQUEST Auto Parts

More documents

Recommendations

Info

Steering Pump Kits17−POWER STEERING PUMPSMiscellaneous KitsR1549 ShownSKU# Product Description ApplicationR1010 Cummins Power Steering Pump Coupler Vickers V−10F and V−20FR1549 Cummins Power Steering Pump Gasket Vickers V−10F and V−20F17 − 35
17−POWER STEERING PUMPSTroubleshootingHARD STEERING1. Improper tire pressure2. Loose pump drive belt3. Low or incorrect fluid4. Loose, bent or poorly lubricated front endparts5. Improper front end alignment6. Bind in steering column or linkage7. Air in hydraulic system8. Low pump output or leaks in system9. Obstruction in lines10. Pump valves sticking or out of adjustment1. Inflate tires to recommended pressures.2. Tighten or replace belt.3. Refill reservoir with proper fluid; check forleaks.4. Tighten or replace parts; lubricate at allfittings.5. Align front end.6. Disassemble and inspect component parts.Repair or replace as necessary.7. Bleed system, refill and check for leaks.8. Disassemble pump, check for worn ordamaged parts. Check for leaks in thesystem.9. Clean or replace lines.10. Replace or adjust valves.LEAKING HOSES AND SEALS1. Too much fluid in pump reservoir2. Damaged or improperly installed "O" ringin pump reservoir3. Loose pump fittings or studs4. Defective pump and seals5. Cracks in hose or splits in fittings1. Remove oil to proper level.2. Replace or adjust.3. Re−torque to specifications.4. Replace.5. Replace hose assembly.LOOSE STEERING1. Loose wheel bearings2. Faulty shocks3. Worn linkage components4. Loose steering gear mounting orlinkage points5. Steering mechanism worn orimproperly adjusted.6. Valve spool improperly adjusted1. Adjust wheel bearings.2. Replace shocks.3. Replace worn components.4. Tighten mountings or linkage.5. Replace and/or adjust mechanism.6. Adjust valve spool.NOISES1. Loose belts2. Low fluid, air in system3. Foreign matter in system4. Improper lubrication5. Interference or chafing in linkage6. Steering gear mountings loose7. Incorrect adjustment or wear in gear box8. Faulty valves or wear in pump1. Replace and/or adjust belts.2. Refill and check for leaks.3. Disassemble and clean system.4. Lubricate all fittings.5. Disassemble, inspect, replace oradjust components.6. Tighten mountings.7. Disassemble, inspect, repair, replaceand/or adjust parts.8. Replace parts as necessary.17 − 36
Page 2 and 3: Table of Contents17−POWER STEERIN
Page 4 and 5: Part Number Index17−POWER STEERIN
Page 6 and 7: Warranty Information17−POWER STEE
Page 8 and 9: Application Guide17−POWER STEERIN
Page 10 and 11: Application Guide17−POWER STEERIN
Page 12 and 13: Hobourn/Eaton17−POWER STEERING PU
Page 22 and 23: LUK17−POWER STEERING PUMPSLUK 93
Page 24 and 25: Parker Hannifin17−POWER STEERING
Page 26 and 27: TRW17−POWER STEERING PUMPSTRW Dod
Page 28 and 29: TRW17−POWER STEERING PUMPSTRW PS
Page 30 and 31: Vickers17−POWER STEERING PUMPSV
Page 32 and 33: Vickers17−POWER STEERING PUMPSVTM
Page 34 and 35: Zahnrdfabrik Fridrichshafen (ZF)17
Page 38 and 39: Troubleshooting17−POWER STEERING
Page 40: CARQUEST CorporationRaleigh, North

Steering Pump Application Guide - CARQUEST Auto Parts

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?