Proline Promass 83E/F/O Operation Manual - FMC Technologies

Proline Promass 83Accessories8 AccessoriesVarious accessories, which can be ordered separately from , are available for thetransmitter and the sensor. Detailed information on the order code in question can be obtained fromthe service organization.8.1 Device-specific accessoriesAccessory Description Order codeTransmitterProline Promass 83Inputs/outputsSoftware packages for -Proline Promass 83Transmitter for replacement or for stock. Use the order code todefine the following specifications:– Approvals– Degree of protection / version– Cable entries,– Display / power supply / operation– Software– Outputs / inputsConversion kit with appropriate plug-in point modules forconverting the input/output configuration in place to date to anew version.Software add-ons on F-Chip, can be ordered individually:– Advanced diagnostics– Batching functions– Concentration measurement83XXX - XXXXX * * * * * *DK8UI - * * * *DK8SO - *8.2 Measuring principle-specific accessoriesAccessory Description Order codeMounting set fortransmitterMounting set for wall-mount housing (remote version).Suitable for:– Wall mounting– Pipe mounting– Installation in control panelMounting set for aluminum field housing:Suitable for pipe mounting (3/4" to 3")DK8WM - *Post mounting set for thePromass A sensorPost mounting set for the Promass A DK8AS - * *Mounting set for thePromass A sensorSet of seals for sensorMounting set for Promass A, comprising:– 2 process connections– SealsFor regular replacement of the seals of the Promass A sensors.Set consists of two seals.DK8MS - * * * * * *DKS - * * *Memograph M graphicdisplay recorderThe Memograph M graphic display recorder providesinformation on all the relevant process variables. Measuredvalues are recorded correctly, limit values are monitored andmeasuring points analyzed. The data are stored in the 256 MBinternal memory and also on a DSD card or USB stick.Memograph M boasts a modular design, intuitive operationand a comprehensive security concept. The ReadWin ® 2000PC software is part of the standard package and is used forconfiguring, visualizing and archiving the data captured.The mathematics channels which are optionally availableenable continuous monitoring of specific power consumption,boiler efficiency and other parameters which are important forefficient energy management.RSG40 - ************Issue/Rev. 0.2 (12/12) MN0M022 • Page 83