Proline Promass 83E/F/O Operation Manual - FMC Technologies

Operation Proline Promass 83!Note!5.4.1 Operating optionsFor the complete operation of the measuring device, including device-specific commands, there areDD files available to the user to provide the following operating aids and programs:• In the CURRENT RANGE function (current output 1), the HART protocol demands the setting"4-20 mA HART" or "4-20 mA (25 mA) HART".• HART write protection can be disabled or enabled by means of a jumper on the I/O board.ä 53HART handheld terminal Field XpertSelecting device functions with a HART Communicator is a process involving a number ofmenu levels and a special HART function matrix.The HART manual in the carrying case of the HART Communicator contains more detailedinformation on the device.Operating program "FieldCare"FieldCare is Endress+Hauser’s FDT-based plant asset management tool and allows the configurationand diagnosis of intelligent field devices. By using status information, you also have a simple buteffective tool for monitoring devices. The Proline flowmeters are accessed via a HART interfaceFXA195 or via the service interface FXA193.Operating program "SIMATIC PDM" (Siemens)SIMATIC PDM is a standardized, manufacturer-independent tool for the operation, configuration,maintenance and diagnosis of intelligent field devices.Operating program "AMS" (Emerson Process Management)AMS (Asset Management Solutions): program for operating and configuring devicesPage 42 • MN0M022Issue/Rev. 0.2 (12/12)