Proline Promass 83E/F/O Operation Manual - FMC Technologies

Operation Proline Promass 83!Note!5.2 Brief operating instructions to the function matrix• See the general notes ä 39• Function descriptions see the "Description of Device Functions" manual1. HOME position F Entry into the function matrix2. Select a block (e.g. OUTPUTS)3. Select a group (e.g. CURRENT OUTPUT 1)4. Select a function group (e.g. SETTINGS)5. Select a function (e.g. TIME CONSTANT)Change parameter / enter numerical values:P Select or enter enable code, parameters, numerical valuesF Save your entries6. Exit the function matrix:– Press and hold down Esc key (X) for longer than 3 seconds HOME position– Repeatedly press Esc key (X) Return step by step to HOME positionEsc- + ErmE–Esc+–Esc+>3so p qE E E E E E E– +– +– +++ ––n+–EEEEFig. 31:Selecting functions and configuring parameters (function matrix)a0001210Page 38 • MN0M022Issue/Rev. 0.2 (12/12)