Proline Promass 83E/F/O Operation Manual - FMC Technologies

Technical data Proline Promass 83Limiting medium pressurerange (rated pressure)The material load diagrams (pressure-temperature diagrams) for the process connections areprovided in the separate "Technical Information" document on the device in question. This can bedownloaded as a PDF file from www.endress.com. A list of the "Technical Information" documentsavailable is provided in the "Documentation" section ä 148.Pressure ranges of secondary containment:Promass A:25 bar (362) psiPromass E:No secondary containmentPromass F:DN 8 to 50 (3/8" to 2"): 40 bar (580 psi)DN 80 (3"): 25 bar (362 psi)DN 100 to 150 (4" to 6"): 16 bar (232 psi)DN 250(10"): 10 bar (145 psi)Promass H:• Zirconium 702/R 60702:DN 8 to 15 (3/8" to ½"): 25 bar (362 psi)DN 25 to 50 (1" to 2"): 16 bar (232 psi)• Tantalum 2.5W:DN 8 to 25 (3/8" to 1"): 25 bar (362 psi)DN 40 to 50 (1½" to 2"): 16 bar (232 psi)Promass I:40 bar (580 psi)Promass P:DN 8 to 25 (3/8" to 1"): 25 bar (362 psi)DN 40 (1½"): 16 bar (232 psi)DN 50 (2"): 10 bar (145 psi)Promass S:DN 8 to 40 (3/8" to 1½"): 16 bar (232 psi)DN 50 (2"): 10 bar (145 psi)Promass O:16 bar (232 psi)Promass X:Type approved, maximum allowable pressure according to ASME BPVC: 6 bar (87 psi)Page 130 • MN0M022Issue/Rev. 0.2 (12/12)