Proline Promass 83E/F/O Operation Manual - FMC Technologies
Proline Promass 83E/F/O Operation Manual - FMC Technologies
Proline Promass 83E/F/O Operation Manual - FMC Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Proline</strong> <strong>Promass</strong> 83Installation#Warning!Special instructions for transporting <strong>Promass</strong> X and O• For transporting use only the lifting eyes on the flanges to lift the assembly.• The assembly must always be attached to at least two lifting eyes.Fig. 5:Instructions for transporting <strong>Promass</strong> OA0015790Fig. 6:Instructions for transporting <strong>Promass</strong> XA00155813.1.3 StorageNote the following points:• Pack the measuring device in such a way as to protect it reliably against impact for storage (andtransportation). The original packaging provides optimum protection.• The permissible storage temperature is –40 to +80 °C (–40 °F to +176 °F), preferably +20 °C(+68 °F).• Do not remove the protective covers or caps on the process connections until you are ready toinstall the device.• The measuring device must be protected against direct sunlight during storage in order to avoidunacceptably high surface temperatures.Issue/Rev. 0.2 (12/12) MN0M022 • Page 13
Change language