Nussbaum Comfortparker Quadro Outdoor T2 - Koch

Features in the scope of delivery• button lifting• button lowering• emergency stop• key switch withkey interlockOutdoor operation terminalInterlocked key switch, removalof the key only in the lower basic position.Scope of supplyS/D-installation with 2 platforms, 4 telescope columns withhydraulic cylinder and hydraulic manifoldWidth of parking spaceWidth of parking space 230cm and pit depth 200cmas standardSafety devices• 2 command-cycle-systems assembled over cross assynchronizing device for safe operation even withunequal load distribution on the platform• entering wedge for easy drive-in and parking• locking device prevents lowering by pipe breakageor leakage• fixation of the car parking systems and hydraulic unitwith HD-anchors, wiring and impact dowels• railings to avoid risk of falling onto the platform,insofar as necessaryNote: Safety guards against shearing and squeezing havepriority and must be provided by the Buyer.Hydraulic unitHydraulic unit “Silencio“ with tubing andwiring to the installation. The oil submergedmotor “Silencio“ is extremely quiet and smoothrunning. The motor-pump assembly is soundabsorbent.Protection against corrosionCorrosion protection version „Classic“ of driving plates bycontinuous line-galvanizing to DIN EN 10142/10143.Corrosion protection version „Classic Plus“ of driving platesby line-galvanizing to DIN EN 10142/10143 (depending onthe market specific needs zinced and powder coated sheetmetal included in the scope of supply).Positioning• hydraulic unit placed directly on the lowerplatform, in the front left side, see pictureabove• between or behind two systems in the piton a 2m high support, see picture aboveDimensions incl. standard switch cabinet• 115cm x 25cm x 75cmDriving platesDriving plates as trapezoidal sheet plates as standard,options see “Extra Equipment“.