Download - Xerox Support and Drivers

Printing on Both Sides of PaperYou can print on both sides of a sheet of paper. Before printing,decide how you want your document oriented.The options are:• Printer Setting, if you select this option, this feature isdetermined by the setting you’ve made on the controlpanel of the printer. If this option does not appear,your printer does not have this feature.• None• Long Edge, which is the conventional layout used inbook binding.• Short Edge, which is the type often used with calendars.22Printing a Reduced or EnlargedDocumentYou can change the size of a page’s content to appear larger orsmaller on the printed page.1 To change the print settings from your softwareapplication, access printer properties. See “Printing aDocument” on page 11.2 From the Paper tab, select Reduce/Enlarge in thePrinting Type drop-down list.3 Enter the scaling rate in the Percentage input box.You can also click the or button.4 Select the paper source, size, and type in Paper Options.5 Click OK and print the document.32 535▲ Long Edge▲ Short Edge• Reverse Duplex, allows you to select general printorder compare to duplex print order. If this option doesnot appear, your printer does not have this feature.NOTE:• Do not print on both sides of labels, transparencies,envelopes, or thick paper. Paper jamming and damage to theprinter may result.• To use double-sided printing, you can use only the followingpaper sizes: A4, Letter, Legal, Oficio and Folio, with a weightof 20~24 lbs (75~90 g/m²).1 To change the print settings from your softwareapplication, access printer properties. “Printing aDocument” on page 11.2 From the Layout tab, select the paper orientation.3 From the Double-sided Printing section, select thebinding option you want.4 Click the Paper tab and select the paper source, size, andtype.5 Click OK and print the document.3532 5AFitting Your Document to aSelected Paper SizeThis printer feature allows you to scale your print job to anyselected paper size regardless of the digital document size. Thiscan be useful when you want to check fine details on a smalldocument.1 To change the print settings from your softwareapplication, access printer properties. See “Printing aDocument” on page 11.2 From the Paper tab, select Fit to Page in the PrintingType drop-down list.3 Select the correct size from the Target Page drop-downlist.4 Select the paper source, size, and type in Paper Options.5 Click OK and print the document.NOTE: If your printer does not have a duplex unit, you shouldcomplete the printing job manually. The printer prints everyother page of the document first. After printing the first side ofyour job, the Printing Tip window appears. Follow the onscreeninstructions to complete the printing job.19Advanced Printing