Download - Xerox Support and Drivers

More documents

Recommendations

Info

Reinstalling Printer SoftwareYou can reinstall the software if installation fails.1 Start Windows.2 From the Start menu select Programs or All Programs→ your printer driver name → Maintenance.3 Select Repair and click Next.4 The list of printers available on the network appears.Select the printer you want to install from the list and thenclick Next.• After connecting the printer, click Next.• If you don’t want to connect the printer at this time, clickNext, and No on the following screen. Then the installationwill start and a test page will not be printed at the end of theinstallation.• The reinstallation window that appears in this User’sGuide may differ depending on the printer andinterface in use.5 Select the components you want to reinstall and clickNext.If you installed the printer software for local printingand you select your printer driver name, the windowasking you to print a test page appears. Do as follows:a. To print a test page, select the check box and clickNext.b. If the test page prints out correctly, click Yes.If it doesn’t, click No to reprint it.6 When the reinstallation is done, click Finish.Removing Printer Software• If you do not see your printer on the list, click Update torefresh the list, or select Add TCP/IP Port to add yourprinter to the network. To add the printer to thenetwork, enter the port name and the IP address for theprinter.• To find a shared network printer (UNC Path), selectShared Printer [UNC] and enter the shared namemanually or find a shared printer by clicking the Browsebutton.You will see a component list so that you can reinstall anyitem individually.NOTE: If your printer is not already connected to thecomputer, the following window will appear.1 Start Windows.2 From the Start menu select Programs or All Programs→ your printer driver name → Maintenance.3 Select Remove and click Next.You will see a component list so that you can remove anyitem individually.4 Select the components you want to remove and then clickNext.5 When your computer asks you to confirm your selection,click Yes.The selected driver and all of its components are removedfrom your computer.6 After the software is removed, click Finish.9Installing Printer Software in Windows
2 Using SetIP(Phaser 3428/DN only)5 Click Next.• Installing SetIP• Using SetIPInstalling SetIP1 Make sure that the printer is connected to your computerand powered on.2 Insert the supplied CD-ROM into your CD-ROM drive.The CD-ROM should automatically run, and an installationwindow appears.If the installation window does not appear, click Start andthen Run. Type X:\Setup.exe, replacing “X” with theletter which represents your drive and click OK.6 Click Finish.Using SetIP1 From the Windows Start menu, select Programs or AllPrograms Xerox Phaser 3428 SetIP SetIP.The program automatically detects and displays newand configured print servers on your network.3 Click Install SetIP Utility(Optional).4 Click Next.2 Select the name of your printer and click . If youcannot find your printer name, click to refreshthe list.NOTES:• To confirm the MAC address, see the NETWORK PRINTERCARD TEST PAGE. The NETWORK PRINTER CARD TESTPAGE will be printed after the Configuration Page.• The refreshed list doesn’t show your printer, click enteryour network printer card’s IP address, subnet mask, defaultgateway, and then click Apply.3 Click OK to confirm the settings.4 Click Exit to close the SetIP program.10Using SetIP (Phaser 3428/DN only)
Page 2 and 3:
This manual is provided for informa
Page 4 and 5:
8. MaintenancePrinting information
Page 6 and 7:
- The power cord is damaged or fray
Page 8 and 9:
Environmental ComplianceUSAEnergy S
Page 10 and 11:
1 IntroductionCongratulations on th
Page 12 and 13:
Rear viewControl panel overview1 St
Page 14 and 15:
2 System setupThis chapter provides
Page 16 and 17:
Paper menuUse the Paper menu to def
Page 18 and 19: Emulation menuUse the Emulation men
Page 20 and 21: Using toner save modeToner save mod
Page 22 and 23: Printer driver featuresYour printer
Page 24 and 25: Configuring TCP/IPYour printer can
Page 26 and 27: 5 Loading print mediaThis chapter w
Page 28 and 29: Guidelines for selecting and storin
Page 30 and 31: Using the tray 1 or the optional tr
Page 32 and 33: For information about setting the p
Page 34 and 35: 6 Basic printingThis chapter explai
Page 36 and 37: 8 MaintenanceThis chapter provides
Page 38 and 39: Redistributing toner cartridgeWhen
Page 40 and 41: 9 TroubleshootingThis chapter provi
Page 42 and 43: Around the toner cartridgeNoteThe f
Page 44 and 45: 2 Remove the jammed paper from the
Page 46 and 47: Understanding display messagesMessa
Page 48 and 49: Solving general printing problemsFo
Page 50 and 51: Condition Possible cause Suggested
Page 52 and 53: ConditionSuggested solutionsConditi
Page 54 and 55: 10 Installing accessoriesYour print
Page 56 and 57: 11 SpecificationsThis chapter inclu
Page 58 and 59: maintaining 8.2redistributing 8.3re
Page 60 and 61: SOFTWARE SECTIONCONTENTSChapter 1:
Page 62 and 63: Chapter 8: USING YOUR PRINTER WITH
Page 64 and 65: NOTE: If your printer is not alread
Page 66 and 67: 5 The list of printers available on
Page 70 and 71: 3 Basic PrintingThis chapter explai
Page 72 and 73: Paper TabUse the following options
Page 74 and 75: Extras TabYou can select output opt
Page 76 and 77: 4 Advanced PrintingThis chapter exp
Page 78 and 79: Printing on Both Sides of PaperYou
Page 80 and 81: Dear ABCRegardsWORLD BESTWORLD BEST
Page 82 and 83: 6 Using Windows PostScriptDriver(Ph
Page 84 and 85: 8 Using Your Printer with aMacintos
Page 86 and 87: Printer Features SettingThe Printer
Page 88 and 89: SOFTWARE SECTIONINDEXAadvanced prin
show all

Download - Xerox Support and Drivers

Create successful ePaper yourself

Delete template?

Save as template?