Download - Xerox Support and Drivers

5 The list of printers available on the network appears. Select theprinter you want to install from the list and then click Next.Custom InstallationYou can choose individual components to install and set aspecific IP address.1 Make sure that the printer is connected to your networkand powered on. For details about connecting to thenetwork, see the supplied printer’s User’s Guide.2 Insert the supplied CD-ROM into your CD-ROM drive.The CD-ROM should automatically run, and an installationwindow appears.If the installation window does not appear, click Start andthen Run. Type X:\Setup.exe, replacing “X” with theletter which represents your drive and click OK.• If you do not see your printer on the list, click Update torefresh the list, or select Add TCP/IP Port to add yourprinter to the network. To add the printer to the network,enter the port name and the IP address for the printer.To verify your printer’s IP address or the MAC address, printa Network Configuration page.• To find a shared network printer (UNC Path), select SharedPrinter [UNC] and enter the shared name manually or finda shared printer by clicking the Browse button.NOTE: To search the network printer, the firewall should bedisabled.6 After the installation is finished, a window asking you toprint a test page appears. If you choose to print a testpage, select the checkbox and click Next.Otherwise, just click Next and skip to step 8.3 Click Install Software.4 Select Custom installation. Click Next.7 If the test page prints out correctly, click Yes.If not, click No to reprint it.8 Click Finish.NOTE: After setup is complete, if your printer driver doesn’twork properly, reinstall the printer driver. See “ReinstallingPrinter Software” on page 9.7Installing Printer Software in Windows