12.07.2015 Views

Download - Xerox Support and Drivers

Download - Xerox Support and Drivers

Download - Xerox Support and Drivers

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

4 Network setup (Phaser 3428/DN only)This chapter gives you step-by-step instructions for setting up yourprinter for network connections.This chapter includes:• Introduction• <strong>Support</strong>ed operating systems• Configuring TCP/IP• Configuring EtherTalk• Configuring IPX frame types• Setting Ethernet speed• Restoring the network configuration• Printing a network configuration pageIntroductionOnce you have connected your printer to a network with an RJ-45Ethernet cable, you can share the printer with other network users.You need to set up the network protocols on the printer to use it as yournetwork printer.<strong>Support</strong>ed operating systemsThe following table shows the network environments supported by theprinter:ItemNetwork interfaceNetwork operatingsystemNetwork protocolsDynamic addressingserver• 10/100 Base-TXRequirements• Novell NetWare 4.x, 5.x, 6.x• Windows 95/98/Me/NT 4.0/2000/XP/2003• Mac OS 8.6 ~ 9.2 <strong>and</strong> 10.1 ~ 10.4• Various Linux OS• NetWare IPX/SPX• TCP/IP on Windows• EtherTalk• DHCP, BOOTP• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange• TCP/IP: Transmission Control Protocol/Internet Protocol• DHCP: Dynamic Host Configuration Protocol• BOOTP: Bootstrap ProtocolVia the control panelYou can set up the following basic network parameters through theprinter’s control panel:• Configure TCP/IP• Configure IPX frame types for NetWare• Configure EtherTalk4.1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!