Download - Xerox Support and Drivers

Using toner save modeToner save mode allows the printer to use less toner on each page.Activating this mode extends the life of your toner cartridge and reducesyour cost per page beyond what one would experience in the normalmode, but it reduces print quality. This setting is not available with the1200 dpi setting.There are two ways to enable this mode:From the control panelTo change the toner save mode from the control panel, follow thesesteps:1 Press Menu until System Setup appears on the bottom line of thedisplay and press OK.2 Press OK when Toner Save appears.3 Press the Scroll buttons to display On on the bottom line and pressOK.Selecting Off means that the toner save mode is deactivated.4 Press Stop to return to Standby mode.From the software applicationYou can set toner save mode from the printer properties window on yourprinter driver. See the Software Section.2.7