Download - Xerox Support and Drivers

Emulation menuUse the Emulation menu to configure printer language emulation.ItemEmulationTypeExplanationValues: Auto, PCL, PostScript, EPSON, IBMProPrintThe printer language defines how the computercommunicates with the printer.If you select Auto, your printer can change theprinter language automatically.NoteThis PostScript is available only with thePhaser 3428/DN.ItemCourierPitchLinesValues: Regular, DarkExplanationThis item lets you select the version of Courier font touse.Values: 0.44 ~ 99.99 (0.01 unit)When you select one between PCL1 and PCL7 fromthe Typeface menu, you can determine the font size bysetting the number of characters that will print in onehorizontal inch of type. The default value, 10 is thebest size.Values: 5 ~ 128SetupValues: PCL, PostScript, EPSONSee the tables on page 2.5 to configure the printerlanguage.NoteThis PostScript is available only with thePhaser 3428/DN.This item allows you to set vertical spacing from 5 to128 lines for the default paper size. The lines maydiffer according to the paper size and printingorientation.PostScript (Phaser 3428/DN only)This menu provides you with the Print PS Error menu item.PCLThis menu sets the PCL emulation configuration. You can set the fonttype, symbol type, lines per page, and point size.ItemTypefaceSymbolPoint SizeValues: PCL1 ~ PCL68ExplanationYou can select the standard font to be used in PCLemulation.• PCL1~PCL7’s interval between letters is fixed, andPCL8~PCL45’s interval is proportional to the fonttype and point size. You can adjust the font size ofPCL1~PCL7, PCL55, PCL56 using the Pitch item,and PCL8~PCL45, PCL57~PCL68 can do usingPoint Size item.• PCL46~PCL54’s interval and point size are fixed.Values: ROMAN8 ~ PC737This item selects the symbol to be used in PCLemulation. The symbol is the group of numbers,marks, and special signs being used when printingletters.Values: 4.00 ~ 999.75 (0.25 unit)When you select one between PCL8 and PCL45 fromthe Typeface menu, you can determine the font size bysetting the height of the characters in the font.ItemPrint PSErrorEPSONExplanationYou can select whether or not your printer prints anerror list when a PS error occurs.• Select On to print PS 3 emulation errors. If an erroroccurs, the job stops processing, the error messageprints, and the printer flushes the job.• If this menu is set to Off, the job is flushed without anindication of the error.This menu sets the EPSON emulation configuration.FontItemCharacterSetValues: On, OffExplanationValues: SANSERIF, ROMANYou can select the standard font will be used inEPSON emulation.Values: USA, FRANCE, GERMANY, UK,DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,NORWAY, DENMARK2, SPAIN2, LATINThis item allows you to select a character set of thedesired language.2.5