Download - Xerox Support and Drivers

Information menuThis menu contains printer information pages that give details about theprinter and its configuration.ItemDuplexExplanationValues: Off, Long Edge, Short EdgeItemMenu MapConfiguratonExplanationThe menu map shows the layout and currentsettings of the control panel menu items.The configuration page shows the printer’scurrent configuration. See page 8.1.To print on both sides of paper, choose the bindingedge as follows.• Long Edge: Flip on the long edge. Prints pagesto read like a book.• Short Edge: Flip on the short edge. Prints pagesto read by flipping over like a note pad.Demo PagePCL Font ListPS3 Font ListEPSON FontThe demo page allows you to check if yourprinter properly performs printing. Seepage 2.6.The font sample list shows all of the fontscurrently available in the selected language.NoteThis PS3 Font List is available onlywith the Phaser 3428/DN.32 5Long Edge in thePortrait orientation2235Long Edge in theLandscape orientationLayout menuUse the Layout menu to define all settings relating to output.ItemOrientationSimplexMarginExplanationValues: Portrait, LandscapeChoose the default orientation of the print imageon the page.PortraitValues: 0.0LandscapeSet the margin of print materials for one-sidedprinting. You can increase or decrease the value in0.1 mm increments.• Top Margin: Set the top margin, from 0.0 to 250mm.• Left Margin: Set the left margin, from 0.0 to 164mm.DuplexMargin35Short Edge in thePortrait orientationSelect Off to print on one side of the paper.Values: Top/Left, Short/Long32 5Short Edge in theLandscape orientationIn this menu, you can set the margins for doublesidedprinting. You can increase or decrease thevalue in 0.1 mm increments.• Top Margin: Set the top margin, from 0.0 to 9.9mm.• Left Margin: Set the left margin, from 0.0 to 9.9mm.• Short Binding: Set the bottom margin of theback of the page for short binding, from 0.0 to 22mm.• Long Binding: Set the right margin of the backof the page for long binding, from 0.0 to 22 mm.2.2