Installation/startup instruction (English) - PNet - Trend

Configure the IQ3/XNC MODBUS Driver6.4.1.1.5 Bit write. (MODBUS Function 5)The example below shows a store configured to write 1 bit at MODBUS address 21 in device 1. The IQ3/XNCretrieves the value to write from the TCL input 1.E001#F05#A00021#N01#I001#C0000 Format type (always 00 for function 5)0001 TCL input of value to write. (This would normally be linked to adigital point in the strategy e.g. reset switch).01 Number of values to write (always 1)00021 Location value to write to.05 MODBUS function (function 5)001 device number6.4.1.1.6 16 bit word write (MODBUS function 6)The example below shows a store configured to write 1 word at MODBUS address 20 in device 1. The IQ3/XNCretrieves the value to write from the TCL input 2.E001#F06#A00020#N01#I002#C02#MS/LSMS/LS Least significant bit first02 Format type0002 TCL input of value to write. (This would normally be linked to ananalogue point in the strategy e.g. setpoint).01 Number values to write (always 1)00020 Location of value to write to.06 MODBUS function (function 6)001 device number30 IQ3/XNC MODBUS Driver Manual TE201101 Issue 2, 12-Apr-2011