Capstone Design Document (pdf) - Capstone Experience

More documents

Recommendations

Info

Figure 3 - Deliverable DatesHardware• Schematic (2/6/07) - Detailed visual representation of all the parts used to build StrikerForce and how each is integrated to the system. This schematic will be displayed in colorfor hard and soft copy created by using PSpice.• PCB Design (2/8/07) - The final arrangement of components on the printed circuit boardthat will allow for easy reproducibility.• Bench Prototype (3/30/07) - This prototype is a functional device that will be testedwithin the lab using a program that has calibrated signals representing simulated inputsignals.• In Vehicle Prototype (4/11/07) - The in vehicle prototype is the final module that willcontain the improvements from the dynamometer test. This module will be physicallyplaced on a diesel engine within a vehicle.Software• Bench Test Signal Generation (2/19/07) - This will be the code written to simulateengine signals for the in lab bench test.• Program Flowchart (1/30/07) - This is a visual display of the operations of the programwill take and how the information received by the engine.• Code Listing (2/26/07) – This is the copy of the code written that will be integrated onthe microcontroller for Striker Force.Documentation• Bench Prototype Test Plan (3/20/07) - The test plan will encapsulate all of the stepsneeded to verify that the Striker Force prototype works successfully within the lab underideal conditions.• Bench Prototype Test Results (3/20/07) - This document will contain all the results ofthe test plan for the bench top prototype.Page 11Capstone Design Document February 1, 2007
• In Vehicle Test Plan (4/11/07) - The in vehicle test plan will contain all of the changesthat are needed to ensure that the module works correctly on every diesel engine in anyvehicle.• In Vehicle Test Results (4/18/07) - This document will contain all of the results from thetest plan for the in vehicle prototype.• System Design Documentation (5/1/07) - This document is the reason why ADS ismaking this module. The system design contains the research obtained for the project,the test plan along with the results, and both the hardware and software principles desiredfor smooth transition of I/O. This document will be presented upon the completion of theproject.• Test Results (4/27/07) - The outcome of the tests performed on all of the differentcomponents used for Striker Force.• Installation Guide (4/26/07) -The installation guide will give the user information on thephysical installation of Striker Force. This document will be presented upon thecompletion of the project.• User Manual (4/20/07) - This will help and instruct the user on the operation of StrikerForce. This document will be presented upon the completion of the project.MilestonesMilestones are detailed events that describe and indicate that Striker Force is workingcorrectly with continuing progress. Each milestone fulfilled brings the project to its finalcompletion. The timeline for the milestones can be seen in Figure 4.Figure 4 - Milestones• Demonstration of Research (1/25/07) - The research will contain all of the necessaryinformation needed to understand all aspects of the project.• Demonstration of Module Components (2/2/07) - The final selection and use of thephysical parts needed to interface between the engine and the program.• Demonstration of Electronic Display (2/2/07) - This will be the user interface that willbe programmed to work with Striker Force.• Completion/Acceptance of Program (2/26/07) - The program design is needed to definethe scope for Striker Force. This will be previously debugged and tested to ensure properfunctionality. Demonstrated over Capstone Live Streaming Video.Page 12Capstone Design Document February 1, 2007
Page 1: Capstone Design DocumentSponsor: Pa
Page 4 and 5: • Read temperature from pyrometer
Page 6: • Analog I/O Porto Pros: ADCo Con
Page 9 and 10: • Velcroo Pros: Universal, Inexpe
Page 11: DeliverablesThe deliverables for th

Capstone Design Document (pdf) - Capstone Experience

Create successful ePaper yourself

Delete template?

Save as template?