Capstone Design Document (pdf) - Capstone Experience

Figure 3 - Deliverable DatesHardware• Schematic (2/6/07) - Detailed visual representation of all the parts used to build StrikerForce and how each is integrated to the system. This schematic will be displayed in colorfor hard and soft copy created by using PSpice.• PCB Design (2/8/07) - The final arrangement of components on the printed circuit boardthat will allow for easy reproducibility.• Bench Prototype (3/30/07) - This prototype is a functional device that will be testedwithin the lab using a program that has calibrated signals representing simulated inputsignals.• In Vehicle Prototype (4/11/07) - The in vehicle prototype is the final module that willcontain the improvements from the dynamometer test. This module will be physicallyplaced on a diesel engine within a vehicle.Software• Bench Test Signal Generation (2/19/07) - This will be the code written to simulateengine signals for the in lab bench test.• Program Flowchart (1/30/07) - This is a visual display of the operations of the programwill take and how the information received by the engine.• Code Listing (2/26/07) – This is the copy of the code written that will be integrated onthe microcontroller for Striker Force.Documentation• Bench Prototype Test Plan (3/20/07) - The test plan will encapsulate all of the stepsneeded to verify that the Striker Force prototype works successfully within the lab underideal conditions.• Bench Prototype Test Results (3/20/07) - This document will contain all the results ofthe test plan for the bench top prototype.Page 11Capstone Design Document February 1, 2007