Asennus - Netrauta.fi

Heater InstallationThe heater is desinged to be placed in the corner of the sauna, but for safetyand convenience, follow the minimum safety distances as provided in Fig. 2.Follow the cubic volumes given in the Technical Diagram (page 16.). Do notinstall the heater to the floor or wall niche. Do not install more than one heaterin a sauna room unless you follow the special instructions for twin-heaterinstallations. In most countries, there is a law that requires heaters to bescrewed to the floor as provided in Fig. 1a. Fix the heater to a wall like shownin Fig. 1b.The heater gets very hot. To avoid the risk of accidental contact with theheater, it is recommended that a heater guard be provided.The cable used for sauna wiring must be HO7RN-F type or its equivalent. Acertified electrician must do the installation of the heater to ensure safety andreliability. Improper electrical connection can cause electric shock or fire. Referto the electrical diagram in page 6.Kuva 2Fig. 2Vähimmäisturvaetäisyydet (mm)Minimum Safety Distances (mm)A20max. 500BHUOM:Tarkista ohjauskeskuksen tehonkestoohjauskeskuksen käyttöohjeesta.Kontaktoriyksikkö tarvitaan, joskiukaan teho ylittää erillisen ohjauskeskuksenkapasiteetin.Erillinen kontaktoriyksikkövoidaan liittää kiukaisiinjoiden teho on 10,5kW taienemmän.NOTE:Please refer to the control unitmanual for maximum power rating.Contactor unit is needed if heater’spower rating exceeds separatecontrol unit’s capacity. Additionalcontactor unit can be connected tothe heaters 10,5kW and higher.TH2-30NB-CNRTH3-35NB-CNRTH3-45NB-CNRTH3-60NB-CNRTH2-30NS-CNRTH3-35NS-CNRTH3-45NS-CNRTH3-60NS-CNRTH4-60NS-CNRTH4-80NS-CNRTH5-90NS-CNRA125125125125125125125150150125125B19001900190019001900190019001900190019001900TH6-80NS-CNRTH6-90NS-CNRTH6-105N-CNRTH6-120N-CNRA125125125150B19001900190021003