Christie DHD800 Serial Communications Protocol-Extended

More documents

Recommendations

Info

PDG-DHT8000L Expand Serial Command Functional Specifications9.10.49 CR_CMTGG_%1 CommandCommandDetailsResponse“CR_CMMTGG_%1” [CR]Get “g” value of Target of Color matchingAcceptable%1“000_%2” [CR]“RED” ---------------------- value of Red is selected“GREEN” ----------------- value of Green is selected“BLUE” -------------------- value of Blue is selected“WHITE” ------------------ value of White is selected“CYAN” -------------------- value of Cyan is selected“MAGENTA” ------------- value of Magenta is selected“YELLOW” --------------- value of Yellow is selected%2 “0000”-”1000”------------ “g” value of color of %1Unacceptable“Error Code” [CR]9.10.50 CR_CMAUTOTESTPAT CommandCommandDetailsResponse“CR_CMAUTOTESTPAT” [CR]Get setting status of Auto test pattern of Color matchingAcceptable%1Unacceptable“000_%1” [CR]“ON” ---------------------- On is selected“OFF” --------------------- Off is selected“Error Code” [CR]9.10.51 CR_CMMSTESTPAT CommandCommandDetailsResponse“CR_CMMSTESTPAT” [CR]Get setting status of Test pattern(Measured) of Color matchingAcceptable%1Unacceptable“000_%1” [CR]“RED” ---------------------- Red is displayed“GREEN” ----------------- Green is displayed“BLUE” -------------------- Blue is displayed“WHITE” ------------------ White is displayed“HALFWHITE” ----------- Half white is displayed“OFF” -----------------------Test pattern display is not displayed“Error Code” [CR]9.10.52 CR_CMTGTESTPAT CommandCommandDetailsResponse“CR_CMTGTESTPAT” [CR]Get setting status of Test pattern(Target) of Color matchingAcceptable%1Unacceptable“000_%1” [CR]“RED” ---------------------- Red is displayed“GREEN” ----------------- Green is displayed“BLUE” -------------------- Blue is displayed“WHITE” ------------------ White is displayed“CYAN” ------------------- Cyan is displayed“MAGENTA” ------------- Magenta is displayed“YELLOW” --------------- Yellow is displayed“OFF” -----------------------Test pattern display is not displayed“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)93/101
PDG-DHT8000L Expand Serial Command Functional Specifications9.10.53 CR_DYNAMICBLACK CommandCommandDetailsResponse“CR_DYNAMICBLACK” [CR]Get setting status of DynamicBlackAcceptable%1Unacceptable“000_%1” [CR]“OFF” ---------------------- Off is selected“LOW” --------------------- Low is selected“HIGH” -------------------- High is selected“Error Code” [CR]9.10.54 CR_HDMISETUP CommandCommandDetailsResponse“CR_HDMISETUP” [CR]Get setting status of HDMI setupAcceptable%1Unacceptable“000_%1” [CR]“NORMAL” ---------------------- Normal is selected“ENHANCED” ------------------ Enhanced is selected“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)94/101
Page 1 and 2:
DHD800 RS232 Codes-ExpandTechnical
Page 4 and 5:
PDG-DHT8000L Expand Serial Command
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45: PDG-DHT8000L Expand Serial Command
Page 102: PDG-DHT8000L Expand Serial Command
show all

Christie DHD800 Serial Communications Protocol-Extended

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?