Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.10.38 CR_PIPSIZE CommandCommandDetailsResponse“CR_PIPSIZE” [CR]Get picture size of “Picture in Picture”. (Sub picture)Acceptable%1%2Unacceptable“000_%1_%2” [CR]“1” -------------------- 10% is selected(Main size)“2” -------------------- 20% is selected(Main size)“3” -------------------- 30% is selected(Main size)“4” -------------------- 40% is selected(Main size)“5” -------------------- 50% is selected(Main size)“6” -------------------- 60% is selected(Main size)“7” -------------------- 70% is selected(Main size)“8” -------------------- 80% is selected(Main size)“9” -------------------- 90% is selected(Main size)“10” ------------------ 100% is selected(Main size)“1” -------------------- 10% is selected(Sub size)“2” -------------------- 20% is selected(Sub size)“3” -------------------- 30% is selected(Sub size)“4” -------------------- 40% is selected(Sub size)“5” -------------------- 50% is selected(Sub size)“Error Code” [CR]9.10.39 CR_PIPFRAMELOCK CommandCommandDetailsResponse“CR_PIPFRAMELOCK” [CR]Get setting status of Frame lock of “Picture in Picture”.Acceptable%1Unacceptable“000_%1” [CR]“MAIN” -------------------- Main picture is selected“SUB” --------------------- Sub picture is selected“Error Code” [CR]9.10.40 CR_PIPSTORE CommandCommandDetailsResponse“CR_PIPSTORE” [CR]Get status (Free or Stored) of User1-User5 of “Picture in Picture”.Acceptable%1Unacceptable“000_%1” [CR]“SFFFF” -------------------- Only User1 is Stored, others are Free:“FFFFS” --------------------- Only User5 is Stored, others are Free“SSSSS” -------------------- All Stored“Error Code” [CR]9.10.41 CR_EDGEBLENDING CommandCommandDetailsResponse“CR_EDGEBLENDING” [CR]Get setting status of Edge blendingAcceptable%1Unacceptable“000_%1” [CR]“ON” ---------------------- On is selected“OFF” --------------------- Off is selected“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)90/101