Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.10.20 CR_FILTIMER CommandCommandDetailsResponse“CR_FILTIMER” [CR]Get time to display Filter cleaning / replacement warning on screenAcceptable%1Unacceptable“000_%1” [CR]“1000” ---------------------- Display massage by 1000h used.“2000” ---------------------- Display massage by 2000h used.“3000” ---------------------- Display massage by 3000h used.“OFF” ---------------------- Off(Warning display is not displayed)“Error Code” [CR]9.10.21 CR_FILREMAIN CommandCommandDetailsResponse“CR_FILREMAIN” [CR]Get remaining number of usable Filter scrollAcceptable%1Unacceptable“000_%1” [CR]“09” = Remaining number of usable Filter scroll : 9 times:“00” = Remaining number of usable Filter scroll : 0 time“Error Code” [CR]9.10.22 CR_TESTPAT CommandCommandDetailsResponse“CR_TESTPAT” [CR]Get setting status of Test patternAcceptable%1Unacceptable“000_%1” [CR]“COLOR” ---------------------- Color bar is displayed“GRAD1” ---------------------- 16step(white→black) is displayed“GRAD2” ---------------------- 16step(white←black) is displayed“GRAD3” ---------------------- 16step(white↓black) is displayed“GRAD4” ---------------------- 16step(white↑black) is displayed“WHITE” ---------------------- All white is displayed“BLACK” ---------------------- All black is displayed“CROSS” --------------------- Cross is displayed“OFF” ---------------------Test pattern display is not displayed“Error Code” [CR]9.10.23 CR_KEYDIS CommandCommandDetailsResponse“CR_KEYDIS” [CR]Get setting status of RC/KEY use limitation (valid or invalid)Acceptable%1Unacceptable“000_%1” [CR]“NONE” ------------------------- RC & KEY are valid“RC” ----------------------------- RC is invalid“KEY” --------------------------- KEY is invalid“?” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)85/101