Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.10.15 CR_PJLOCKNOW CommandCommandDetailsResponse“CR_PJLOCKNOW” [CR]Get actual setting status of PIN code lockAcceptable%1Unacceptable“000_%1” [CR]“LOCK” ------ PJ is lockedPIN code lock is set to ON1/ON2 on the menu and PJ PIN code isnot entered, therefore PJ is actually locked.“FREE” ------- PJ is unlocked (either A or B)A) PJ lock is set to OFF on the menuB) PJ lock is set to ON1/ON2 on the menu, but PIN code Lockmode is canceled because PJ PIN code is entered.“Error Code” [CR]9.10.16 CR_PJLOCMENU CommandCommandDetailsResponse“CR_PJLOCKMENU” [CR]Get ON/OFF setting status of PIN code lock on menuAcceptable%1Unacceptable“000_%1” [CR]“ON1” -------------------- PIN code lock ON 1 is set on the menu“ON2” -------------------- PIN code lock ON 2 is set on the menu“OFF” -------------------- PIN code lock OFF is set on the menu“Error Code” [CR]9.10.17 CR_FILH CommandCommand “CR_FILH” [CR]Details Get Filter used timeAcceptable “000_%1” [CR]Response %1 “00000 - 99999”Unacceptable “Error Code” [CR]9.10.18 CR_FILCOND CommandCommandDetailsResponse“CR_FILCOND” [CR]Get status of filter clogAcceptable%1Unacceptable“000_%1” [CR]“CLOG” = Filter is clogged“WARN” = Filter is nearly clogged“CLEAN” = Filter is not clogged“Error Code” [CR]9.10.19 CR_FILREPL CommandCommandDetailsResponse“CR_FILREPL” [CR]Get status of Filter cleaning / replacement timeAcceptable%1Unacceptable“000_%1” [CR]“1Y”-------Filter Exchange time is over value of Filter Message.“1N”--Filter Exchange time is not over value of Filter Message.“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)84/101