Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.10.10 CR_RSENS CommandCommandDetailsResponse“CR_RSENS” [CR]Get selected location of infrared remote receiver of remote controlAcceptable%1Unacceptable“000_%1” [CR]“ALL” ------------------ Front and back and top parts are valid“FRONTTOP” ------- Both front and top parts are valid“BACKTOP” --------- Both back and top parts are valid“FRONTBACK” ----- Both front and back parts are valid“FRONT” ------------- Only front part is valid“TOP” ----------------- Only top part is valid“BACK” --------------- Only back part is valid“?” [CR]9.10.11 CR_P-MANE CommandCommandDetailsResponse“CR_P-MANE” [CR]Get setting status of Power managementAcceptable%1Unacceptable“000_%1” [CR]“OFF” ------------------------ Power Management is disabled“READY” -------------------- Power Management is set to Ready“SHUTDOWN” -----Power Management is set to Shut Down mode“?” [CR]9.10.12 CR_P-MANETIME CommandCommand “CR_P-MAETIME” [CR]Details Get setting time for starting Power Management functionAcceptable “000_%1” [CR]Response %1 “001 – 030” ----------------------- 1 to 30 minutesUnacceptable “?” [CR]9.10.13 CR_ONSTA CommandCommandDetailsResponse“CR_ON-STA” [CR]Get Power ON Start setting statusAcceptable%1Unacceptable“000_%1” [CR]“ON” -------------------------- Power ON Start is set to ON.“OFF” ------------------------ Power ON Start is set to OFF.“?” [CR]9.10.14 CR_SECURITY CommandCommandDetailsResponse“CR_ SECURITY” [CR]Get ON/OFF setting status of Security on menu.Acceptable%1Unacceptable“000_%1” [CR]“ON” ------------ PJ is locked“OFF” ----------- PJ is not locked.“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)83/101