Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.10.5 CR_BACKGND CommandCommandDetailsResponse“CR_BACKGND” [CR]Get setting status of Screen for no signalAcceptable%1Unacceptable“000_%1” [CR]“BLUE” -------------------------------- Blue Back is selected“USER” ------------------------------- User is selected“BLACK” ------------------------------ Black Back is selected“Error Code” [CR]9.10.6 CR_LOGO CommandCommandDetailsResponse“CR_LOGO” [CR]Get Logo setting statusAcceptable%1Unacceptable“000_%1” [CR]“DFLT” ----------------------------- Default Logo is enabled“USER” --------------------------- User is enabled“OFF” ------------------------------ Off is enabled“?” [CR]9.10.7 CR_LOGOLOCK CommandCommandDetailsResponse“CR_LOGOLOCK” [CR]Get setting status of Logo Lock functionAcceptable%1Unacceptable“000_%1” [CR]“ON” --------------------------- Logo Lock is ON“OFF” ------------------------- Logo Lock is OFF“Error Code” [CR]9.10.8 CR_FANSPEED CommandCommandDetailsResponse“CR_FANSPEED” [CR]Get currently selected Fan Control SpeedAcceptable%1Unacceptable“000_%1” [CR]“MAX” -------------------- Max speed of Fan Control is selected“NOR” -------------------- Normal speed of Fan Control is selected“?” [CR]9.10.9 CR_RCODE CommandCommandDetailsResponse“CR_RCODE” [CR]Get currently selected Remote Control codeAcceptable%1Unacceptable“000_%1” [CR]“001” -------------------------- Code1:“008” -------------------------- Code8“?” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)82/101