Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.10 Setting Status Read Commands9.10.1 CR_LANG CommandCommandDetailsResponse“CR_LANG” [CR]Get selected languageAcceptable%1Unacceptable“000_%1” [CR]“ENG” -------------------------- English is selected“DEU” -------------------------- German is selected“FRA” -------------------------- French is selected“ITA” ---------------------------- Italian is selected“ESP” -------------------------- Spanish is selected“POR” -------------------------- Portuguese is selected“NED” -------------------------- Dutch is selected“SVE” -------------------------- Swedish is selected“CHI” --------------------------- Chinese is selected“KOR” -------------------------- Korean is selected“JPN” --------------------------- Japanese is selected“RUS” -------------------------- Russian is selected“?” [CR]9.10.2 CR_SIMPLEMENU CommandCommandDetailsResponse“CR_SIMPLEMENU” [CR]Get setting status of Simple menuAcceptable%1Unacceptable“000_%1” [CR]“ON” -------------------------------- On is selected“OFF” ------------------------------- Off is selected“Error Code” [CR]9.10.3 CR_MENUSIZE CommandCommandDetailsResponse“CR_MENUSIZE” [CR]Get setting status of Menu sizeAcceptable%1Unacceptable“000_%1” [CR]“NORMAL” ------------------------ Normal is selected“DOUBLE” ------------------------ Double is selected“Error Code” [CR]9.10.4 CR_DISP CommandCommandDetailsResponse“CR_DISP” [CR]Get Display setting statusAcceptable%1Unacceptable“000_%1” [CR]“ON” -------------------------- Display is set to ON.“CNTDWNOFF” ------------ Display is set to Count down OFF.“OFF” ------------------------ Display is set to OFF.“?” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)81/101