Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.9.5 CR_INFLAMP CommandCommandDetailsResponse“CR_INFLAMP” [CR]Get Lamp mode switching statusAcceptable%1Unacceptable“000_%1” [CR]“NML” --------- in Normal status (lamp switching operation is notactive.)“?” [CR]9.9.6 CR_PROJH CommandCommand “CR_PROJH” [CR]Details Get total running time of projector (in hours)Acceptable “000_%1” [CR]Response %1 “0000000” – “0099999”Unacceptable “?” [CR]9.9.7 CR_HMLAMP CommandCommand “CR_HMLAMP” [CR]Details Get total lamp numberAcceptable “000_%1” [CR]Response %1 “002”Unacceptable “?” [CR]9.9.8 CR_LAMPH CommandCommandDetailsResponse“CR_LAMPH” [CR]Get Lamp running time (in hours)* return actual lamp running timeAcceptable%1_%2%3_%4“000_%1_%2_%3_%4” [CR]Lamp 1 data comes first, and then one space, after that lamp 2data is followed.%1 = lamp No.1%2 = lamp No.2%3 = lamp No.3%4 = lamp No.4※ In the case of 2-lamps model, % 1 and % 2 are only used(There are no % 3 and % 4)Unacceptablee.g.; “00410_00410_00410_00410” [CR]▪▪▪▪ → Lamp No.1 = 410 HoursLamp No.2 = 410 HoursLamp No.3 = 410 HoursLamp No.4 = 410 Hours“?” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)79/101