Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.7.5 CR_MODELIST CommandCommandDetails“CR_MODELIST” [CR]Get possible modes for Mode listAcceptable“000_%1_%2_---_%x” [CR]Error Code “101” is returned except for PC-Analog and for nosignal with PC-AnalogPossible modes in Mode1-10 are returned when PC-Analogsignal is coming.Response%1Unacceptable“MODE1”“MODE2”“MODE3”::“MODE8”“MODE9”“MODE10”“Error Code” [CR]9.7.6 CR_SRCINP1 CommandCommandDetailsResponse“CR_SRCINP1” [CR]Get Source of Input1Acceptable%1Unacceptable“000_%1” [CR]“DIGITAL” ---------------------- in Computer mode“ANALOG”“ -------------------- in Computer mode“VIDEO” ------------------------- in Video mode“S-VIDEO” ---------------------- in Video mode“YPBPR” ------------------------ in Component mode“SDI1” --------------------------- in DF-SDI1 mode“SDI2” --------------------------- in DF-SDI2 mode“HDCP” ------------------------- in HDCP mode“HDMI” -------------------------- in HDMI mode“SCART”------------------------- in SCART mode“BLANK” ------------------------ There is no input source“NOCARD” --------------------- There is no board inserted“?” [CR]9.7.7 CR_SRCINP2 CommandCommand “CR_SRCINP2” [CR]Details Get Source of Input 2Acceptable “000_%1” [CR]Response %1 The same data as CF_SRCINP1Unacceptable “?” [CR]9.7.8 CR_SRCINP3 CommandCommand “CR_SRCINP3” [CR]Details Get Source of Input 3Acceptable “000_%1” [CR]Response %1 The same data as CF_SRCINP1Unacceptable “?” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)72/101