Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional SpecificationsInput is Videoor S-video“AUTO” ------------------- indicates Auto is selected“NTSC” ------------------- indicates NTSC is selected“NTSC443” -------------- indicates NTSC4.43 is selected“PAL” ---------------------- indicates PAL is selected“SECAM” ----------------- indicates SECAM is selected“PAL-M” ------------------- indicates PAL-M is selected“PAL-N” ------------------- indicates PAL-N is selected* Selected System is returned, whether or not signal iscoming.Input isDual-SDIUnacceptable“D-1035I” -------------------- indicates D-1035i is selected“D-1080I” -------------------- indicates D-1080i is selected“D-720P” --------------------- indicates D-720p is selected“D-1080P” ------------------- indicates D-1080p is selected“D-1080PSF/24” ------- indicates D-1080psf/24 is selected“D-1080I” ------------------- indicates D-1080i is selected* Error Code “101” [CR] is returned for no signal“Error Code” [CR]9.7.4 CR_ SYSLIST CommandCommandDetails“CR_SYSLIST” [CR]Get possible systems for System listAcceptable“000_%1_%2_---_%x” [CR]Error Code “101” is returned for no signal.Otherwise following values are returned according to Source.When input is PC-Analog;“XGA1” --------------------------------- XGA1 is in the list“1080I” --------------------------------- 1080i is in the list“1080PSF/24” ------------------------ 1080psf/24 is in the list“1080PSF/25” ------------------------ 1080psf/25 is in the list“1080PSF/30” ------------------------ 1080psf/30 is in the list* Auto, Mode1-10 shall not be returned.Response%1UnacceptableWhen input is PC-digital or AV-HDCP;“D-XGA” ------------------------------- D-XGA is in the list“D-720P” ------------------------------- D720p is in the list“D-1080PSF/24” --------------------- D1080psf/24 is in the list“D-1080PSF/25” --------------------- D1080psf/25 is in the list“D-1080PSF/30” --------------------- D1080psf/30 is in the listWhen input is Y,Pb/Cb,Pr/Cr;All possible systems in Menu, including Auto, are returned;“AUTO” --------------------------------- Auto is in the list“1080I” ----------------------------------- 1080i is in the list“1035I” ----------------------------------- 1035i is in the list:“575I” ------------------------------------- 575i is in the list“480I” ------------------------------------- 480i is in the listWhen input is Video or S-video;All possible systems in Menu, including Auto, are returned;“AUTO” ----------------------------------- Auto is in the list“PAL” -------------------------------------- PAL is in the list“SECAM” --------------------------------- SECAM is in the list:“PAL-N” ------------------------------------ PAL-N is in the list“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)71/101