Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.7 Input Read Command9.7.1 CR_INPUT CommandCommand “CR_INPUT” [CR]Details Get selected INPUT No.Acceptable “000_%1” [CR]Response %1 “1” – “4”Unacceptable “?” [CR]9.7.2 CR_SOURCE CommandCommandDetailsResponse“CR_SOURCE” [CR]Get selected SourceAcceptable%1Unacceptable“000_%1” [CR]“DIGITAL” --------------------- DVI Input is selected“ANALOG --------------------- ANALOG RGB is selected“VIDEO” ----------------------- Video Input is selected“S-VIDEO” -------------------- S-VIDEO Input is selected“YPBPR” ---------------------- Y/Pb/Pr Input is selected“SDI1” ------------------------- DF-SDI1 Input is selected“SDI2”-------------------------- DF-SDI2 Input is selected“HDCP” ----------------------- HDCP Input is selected“HDMI” ------------------------ HDMI Input is selected“SCART” ---------------------- SCART Input is selected“BLANK” ---------------------- without Source“NOCARD” --------------------- There is no board inserted“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is receivedDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)69/101