Christie DHD800 Serial Communications Protocol-Extended

More documents

Recommendations

Info

PDG-DHT8000L Expand Serial Command Functional Specifications9.5.5 CR_CLAMP CommandCommandDetailsResponse“CR_CLAMP” [CR]Get value of ClampAcceptable“000_%1” [CR]%1 “0000” – “ 4095”Unacceptable“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is received9.5.6 CR_DDOTS CommandCommandDetailsResponse“CR_DDOTS” [CR]Get value of Display DotsAcceptable%1Unacceptable“000_%1” [CR]“0256”-”nnnn”(nnnn = Total Dots – Position H)“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is received9.5.7 CR_DLINE CommandCommandDetailsResponse“CR_DLINE” [CR]Get value of Display LineAcceptable%1Unacceptable“000_%1” [CR]“0100” – “ nnnn”(nnnn = Total Line – Position V)“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is receivedDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)65/101
PDG-DHT8000L Expand Serial Command Functional Specifications9.5.8 CR_SETPCADJ CommandCommandDetailsResponse“CR_SETPCADJ” [CR]Get PC signal for current systemAcceptable%1“000_%1” [CR]When input signal is PC Analog;“VGA1” ------------------------ Indicates VGA1 is selected:“XGA1” ------------------------ Indicates XGA1 is selected:“WXGA3” --------------------- Indicates WXGA3 is selected“1080I” ------------------------ Indicates 1080i is selected“1035I” ------------------------ Indicates 10350i is selected“720p” ------------------------- Indicates 720p is selected“575p” ------------------------- Indicates 575p is selected“480p” ------------------------- Indicates 480p is selected“575I” -------------------------- Indicates 575i is selected“480I” -------------------------- Indicates 480i is selected“1080psf/24” ----------------- Indicates 1080psf/24 is selected“1080psf/25” ----------------- Indicates 1080psf/25 is selected“1080psf/30” ----------------- Indicates 1080psf/30 is selected“MODE1” --------------------- Indicates Mode1 is selected:“MODE10” ------------------- Indicates Mode10 is selected“EXT11” ---------------------- EXT11 is selected:“EXT60” ---------------------- EXT60 is selectedUnacceptable* Error Code “101” [CR] is returned for no signal.* When input signal is not PC Analog, error code “101” isreturned.“?” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)66/101
Page 1 and 2:
DHD800 RS232 Codes-ExpandTechnical
Page 4 and 5:
PDG-DHT8000L Expand Serial Command
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17: PDG-DHT8000L Expand Serial Command
Page 102: PDG-DHT8000L Expand Serial Command
show all

Christie DHD800 Serial Communications Protocol-Extended

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?