Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.5.5 CR_CLAMP CommandCommandDetailsResponse“CR_CLAMP” [CR]Get value of ClampAcceptable“000_%1” [CR]%1 “0000” – “ 4095”Unacceptable“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is received9.5.6 CR_DDOTS CommandCommandDetailsResponse“CR_DDOTS” [CR]Get value of Display DotsAcceptable%1Unacceptable“000_%1” [CR]“0256”-”nnnn”(nnnn = Total Dots – Position H)“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is received9.5.7 CR_DLINE CommandCommandDetailsResponse“CR_DLINE” [CR]Get value of Display LineAcceptable%1Unacceptable“000_%1” [CR]“0100” – “ nnnn”(nnnn = Total Line – Position V)“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is receivedDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)65/101