Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.4.17 CR_BCOLOR CommandCommandDetailsResponse“CR_PROGV” [CR]Get BrilliantColor setting statusAcceptable%1Unacceptable“000_%1” [CR]“ON” ------------------------------ Set BrilliantColor to On“OFF” ----------------------------- Set BrilliantColor to Off“Error Code” [CR] -----------When command is invalid in the givencondition (such as being selected input)“?” [CR] --------- When unknown command is received9.4.18 CR_IMAGE CommandCommandDetailsResponse“CR_IMAGE” [CR]Get image setting status.The Required data “CUSTOM1” – “CUSTOM10” corresponds to “Image1” –“Image10” displayed when selecting Image on OSD Menu.Acceptable%1Unacceptable“000_%1” [CR]“STAND” ----------------------------------- Standard“REAL” ----------------------------------- Real“CINEMA” --------------------------------- Cinema“DYNAMIC” -------------------------------- Dynamic“CUSTOM1” ------------------------------- “Image1”“CUSTOM2” ------------------------------- “Image2”“CUSTOM3” ------------------------------- “Image3”“CUSTOM4” ------------------------------- “Image4”“CUSTOM5” ------------------------------- “Image5”“CUSTOM6” ------------------------------- “Image6”“CUSTOM7” ------------------------------- “Image7”“CUSTOM8” ------------------------------- “Image8”“CUSTOM9” ------------------------------- “Image9”“CUSTOM10” ----------------------------- “Image10”“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is received9.4.19 CR_IMGGMD CommandCommandDetailsResponse“CR_IMGGMD” [CR]Get setting status of Standard/Real/Cinema/Dynamic in Image GammaAcceptable%1Unacceptable“000_%1” [CR]“STD” ------------------------------ Standard“REL” ------------------------------ Real“CNM” ----------------------------- Cinema“DYN” ----------------------------- Dynamic“?” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)63/101