Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications9.4.12 CR_OFFSET-B CommandCommand “CR_OFFSET-B” [CR]Details Get user controlled Blue value of OffsetAcceptable “000_%1” [CR]Response %1 “000” – “063”Unacceptable “?” [CR]9.4.13 CR_SHARP CommandCommand “CR_SHARP” [CR]Details Get user controlled value of SharpnessAcceptable “000_%1” [CR]Response %1 “000” – “031”Unacceptable “?” [CR]9.4.14 CR_GAMMA CommandCommand “CR_GAMMA” [CR]Details Get user controlled value of GammaAcceptable “000_%1” [CR]Response %1 “000” – “015”Unacceptable “?” [CR]9.4.15 CR_NZRED CommandCommandDetailsResponse“CR_NZRED” [CR]Get Noise Reduction setting statusAcceptable%1Unacceptable“000_%1” [CR]“ON” --------------------------- Noise Reduction is ON“OFF” ------------------------- Noise Reduction is OFF“Error Code” [CR] -----------When command is invalid in the givencondition (such as being selected input)“?” [CR] --------- When unknown command is received9.4.16 CR_PROGV CommandCommandDetailsResponse“CR_PROGV” [CR]Get Progressive scan setting statusAcceptable%1Unacceptable“000_%1” [CR]“ON” ------------------------------ Set Progressive scan On“FILM” ----------------------------- Select FILM mode“OFF” ------------------------------ Set Progressive scan Off“Error Code” [CR] -----------When command is invalid in the givencondition (such as being selected input)“?” [CR] --------- When unknown command is receivedDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)62/101