Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications8.9.62 CF_CCAPTIONCOLOR CommandCommand%1DetailsResponse“CF_CCAPTIONCOLOR _%1” [CR]“COLOR” ------- Select Color“WHITE” -------- Select WhiteSelect color of Closed caption.The status set with this command is stored in EEPROM and its setting is effectiveeven after ALL is OFF. This command is available in normal Power ON status.Note)Closed caption is available under conditions below;Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixedto NTSC.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.63 CF_FRAMELOCK CommandCommand%1DetailsResponse“CF_FRAMELOCK_%1” [CR]“AUTO” --- Set Frame lock function to Auto.“23.98” --- Set Frame lock to “Manual, 23.98 Hz.”“25.00” --- Set Frame lock to “Manual, 25.00 Hz.”“29.97” --- Set Frame lock to “Manual, 29.97 Hz.”“30.00” --- Set Frame lock to “Manual, 30.00 Hz.”“50.00” --- Set Frame lock to “Manual, 50.00 Hz.”“59.94” --- Set Frame lock to “Manual, 59.94 Hz.”“60.00” --- Set Frame lock to “Manual, 60.00 Hz.”Set Frame lock function to Auto or Manual.(Valid only when in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.64 CF_FRAMELOCKADJ CommandCommand%1DetailsResponse“CF_FRAMELOCKADJ_%1” [CR]“UP” ----------------------- Search frame lock frequency upward.“DN” ---------------------- Search frame lock frequency downward.Search Frame lock frequency and set manually.(Valid only when in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.65 CF_FRAMELOCKRST CommandCommand“CF_FRAMELOCKRST_%1” [CR]%1 “RST” --- Reset Frame lock frequencyDetailsResponseReset the setting of Frame lock.(Valid only when in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)56/101