Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications8.9.55 CF_SHUTRCPROT CommandCommand%1DetailsResponse“CF_SHUTRCPROT_%1” [CR]“ON” ------------------ Disable RC key from controlling Shutter (Protection On)“OFF” ----------------- Enable RC key to control Shutter (Protection Off)Set valid / invalid of RC use on Shutter control function(Valid only when in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.56 CF_SHUTKEYPROT CommandCommand%1DetailsResponse“CF_SHUTKEYPROT_%1” [CR]“ON” --------- Disable key on the side panel from controlling Shutter (Protection On)“OFF” -------- Enable key on the side panel to control Shutter (Protection Off)Set valid / invalid use of key on the side panel on Shutter control function.(Valid only when in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.57 CF_SHUTH CommandCommand%1DetailsResponse“CF_SHUTH_%1” [CR]“005”-“480”----------Specify setting time directly“UP” ------------------ Add 1 minute“DN” ------------------Decrease 1 minuteSet time of operating shutter management function.(Valid only when in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.58 CF_SHUTEFFECT CommandCommand%1DetailsResponse“CF_SHUTEFFECT_%1” [CR]“OFF” --------Disable fade in and out function of Shutter“L1” --------- Set fade in and out function of Shutter to L1“L2” --------- Set fade in and out function of Shutter to L2Set Effect function of Shutter. (Valid only when in the normal Power ON status)When L1 is selected, projected image quickly fade in and out.When L2 is selected, projected image slowly fade in and out.The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)54/101