Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications8.9.51 CF_FILSCRL CommandCommand “CF_FILSCRL_%1” [CR]%1 “RST” ---------------------- Reset Filter scroll counterDetails Reset Filter scroll counterResponseAcceptable AcceptableUnacceptable Unacceptable8.9.52 CF_TESTPAT CommandCommand%1DetailsResponse“CF_TESTPAT_%1” [CR]“COLOR” ---------------------- Display Color bar“GRAD1” ---------------------- Display 16step(white→black)“GRAD2” ---------------------- Display 16step(white←black)“GRAD3” ---------------------- Display 16step(white↓black)“GRAD4” ---------------------- Display 16step(white↑black)“WHITE” ---------------------- Display all white“BLACK” ---------------------- Display all black“CROSS” --------------------- Display Cross“OFF” ---------------------------Do not show test pattern display“UP” --------------------------- Switch forward“DN” --------------------------- Switch backwardExecute test pattern display.(Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.53 CF_FDEFAULT CommandCommand%1 “RST”DetailsResponse“CF_FDEFAULT_%1” [CR]Return the settings to Factory Default status(Valid only when in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.54 CF_KEYDIS CommandCommand%1DetailsResponse“CF_KEYDIS_%1” [CR]“NONE” ------------------------- RC & KEY are valid“RC” ----------------------------- RC is invalid“KEY” --------------------------- KEY is invalidSet the limitation of RC/KEY use (Valid only when in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)53/101