Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications8.9.30 CF_CMAUTOTESTPAT CommandCommand%1DetailsResponse“CF_CMAUTOTESTPAT_%1” [CR]“ON” ---------------------- Set to On“OFF” -------------------- Set to OffSet Auto test pattern of Color matching.(Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.31 CF_CMRST CommandCommand%1DetailsResponse“CF_CMRST_%1” [CR]“CMRST” ---------------------- Reset setting of Color matching“ADCRST” -------------------- Reset setting of Advanced color matchingReset setting of Color matching.(Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.32 CF_CMSTORE CommandCommand%1DetailsResponse“CF_CMSTORE_%1” [CR]“CMSTR” ---------------------- Store setting of Color matching“ADCSTR” -------------------- Store setting of Advanced color matchingStore setting of Color matching.(Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.33 CF_CMMSTESTPAT CommandCommand%1DetailsResponse“CF_CMMSTESTPAT_%1” [CR]“RED” ---------------------- Display Red“GREEN” ------------------ Display Green“BLUE” -------------------- Display Blue“WHITE” ------------------ Display White“HALFWHITE” ---------- Display Half white“OFF” --------------------- Do not show test pattern displayDisplay Test pattern of Measured of Color matching.(Available only in the normal Power ON status)*The selectable colors are different by using Color wheel.For brightness: Red/Green/Blue/Half white/WhiteFor color reproduction: Red/Green/Blue/White*When transmit the command of the color that is impossible of choice, return “101”[CR].AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)47/101