Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications8.9.23 CF_BLENDMENUOFF CommandCommand%1DetailsResponse“CF_BLENDMENUOFF_%1” [CR]“SET” ---------------------- Temporarily hide Edge blending menu and edge line“RST” ---------------------- Display Edge blending menu and edge lineSet Menu off function of Edge blending.(Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.24 CF_BLENDMENU CommandCommand%1DetailsResponse“CF_BLENDMENU_%1” [CR]“ON” ---------------------- Display Edge blending menu and edge line.“OFF” --------------------- Set Edge blending menu and edge line undisplayed.Set Edge blending menu and edge line displayed or undisplayed.(Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.25 CF_COLORMATCHING CommandCommand%1DetailsResponse“CF_COLORMATCHING_%1” [CR]“ON” ---------------------- Set to On“OFF” -------------------- Set to OffSet status of Color matching.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.26 CF_CMMSXY CommandCommand%1“CF_CMMSXY_%1_%2_%3” [CR]“RED” ---------------------- Set value of Red“GREEN” ----------------- Set value of Green“BLUE” -------------------- Set value of Blue“WHITE” ------------------ Set value of White“HALFWHITE” ---------- Set value of Half white%2 “0000” – “1000” --------- Directly specify “x” value of color of %1%3 “0000” – “1000” --------- Directly specify “y” value of color of %1DetailsResponseSet “x”,”y” value of Measured of Color matching.(Available only in the normal Power ON status)*The selectable colors are different by using color wheel.For brightness: Red/Green/Blue/Half white/WhiteFor color reproduction: Red/Green/Blue/White*When transmit the command of the color that is impossible of choice, return “101”[CR].AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)45/101