Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional Specifications8.9.19 CF_BLENDBLK CommandCommand%1“CF_BLENDBLK_%1_%2” [CR]“R” ---------------------- Red“G” ---------------------- Green“B” ----------------------- Blue%2 “-127” ~ “0127”-------------------- Directly specify value of color of %1DetailsResponseSet value of color specified by Edge blending %1.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.20 CF_BLENDBLKALL CommandCommand“CF_BLENDBLKALL_%1” [CR]%1DetailsResponse“UP” ------------------------------- Increment value of Black level(R/G/B) by 1“DN” ------------------------------ Decrement value of Black level(R/G/B) by 1Set value of all of Black level of Edge blending.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.21 CF_BLENDTESTPAT CommandCommand“CF_BLENDTESTPAT_%1” [CR]%1DetailsResponse“ON” ---------------------- Set to On“OFF” -------------------- Set to OffSet Test pattern of Edge blending.(Available only in the normal Power ON status)The status set by this command is stored in EEPROM and setting remainseffective even after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.22 CF_BLENDRST CommandCommand“CF_BLENDRST_%1” [CR]%1 “RST” ---------------------- Reset current setting statusDetailsResponseReset current setting status of Edge blending.(Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)44/101