Christie DHD800 Serial Communications Protocol-Extended

More documents

Recommendations

Info

PDG-DHT8000L Expand Serial Command Functional Specifications8.8 Lamp Command8.8.1 CF_LAMPMODE CommandCommand%1DetailsResponse“CF_LAMPMODE_%1” [CR]“FULL” --------------------------- Set lamp mode to 2-lamp (FULL)“LAMP1” ------------------------- Set lamp1 mode“LAMP2” ------------------------- Set lamp2 modeSelect Lamp mode. (Valid only when in the normal Power ON status.)The value set by this command is stored in EEPROM and the setting remainseffective after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.8.2 CF_AUTOLAMPCONTRL CommandCommand%1DetailsResponse“CF_AUTOLAMPCONTRL_%1” [CR]“NORMAL” --------------------- Set lamp control mode to NORMAL“ECO1” -------------------------- Set lamp control mode to ECO1“ECO2” -------------------------- Set lamp control mode to ECO2Select Lamp control mode. (Valid only when in the normal Power ON status.)The value set by this command is stored in EEPROM and the setting remainseffective after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.8.3 CF_LAMPLIFECONTRL CommandCommand%1DetailsResponse“CF_LAMPLIFECONTRL_%1” [CR]“MODE1” -------------------------- Set Lamp life control mode to Mode1“MODE2” -------------------------- Set Lamp life control mode to Mode2Select Lamp life control. (Valid only when in the normal Power ON status.)The value set by this command is stored in EEPROM and the setting remainseffective after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.8.4 CF_LAMPINTERVAL CommandCommand%1DetailsResponse“CF_LAMPINTERVAL_%1” [CR]“AUTO” ------------------------- Set Lamp interval to Auto“0024” --------------------------- Set Lamp interval to 24 hours“0200” --------------------------- Set Lamp interval to 200 hours“0500” --------------------------- Set Lamp interval to 500 hours“1000” --------------------------- Set Lamp interval to 1000 hours“2000” --------------------------- Set Lamp interval to 2000 hours“OFF” ---------------------------- Set Lamp interval to OFFSelect Lamp interval. (Valid only when in the normal Power ON status.)The value set by this command is stored in EEPROM and the setting remainseffective after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)37/101
PDG-DHT8000L Expand Serial Command Functional Specifications8.9 Setting Command8.9.1 CF_LANG CommandCommand%1DetailsResponse“CF_LANG_%1” [CR]“ENG” --------------------------- Select ENGLISH“DEU” --------------------------- Select German“FRA” --------------------------- Select French“ITA” ----------------------------- Select Italian“ESP” ---------------------------- Select Spanish“POR” --------------------------- Select Portuguese“NED” --------------------------- Select Dutch“SVE” --------------------------- Select Swedish“JPN” --------------------------- Select Japanese“CHI” ---------------------------- Select Chinese“KOR” --------------------------- Select Korean“RUS” --------------------------- Select RussianSelect language for OSD. (Valid only when in the normal Power ON status.)The language set by this command is stored in EEPROM and the setting remainseffective after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.2 CF_ MENUPOSITION CommandCommand%1DetailsResponse“CF_MENUPOSITION_%1” [CR]“UP” ----------------------------- Move Menu position to upper side.“DN” ----------------------------- Move Menu position to lower side.“LEFT” -------------------------- Move Menu position to left side.“RIGHT” ------------------------ Move Menu position to right side.Move Menu position. (Valid only when in the normal Power ON status.)This function is worked from the first reception of Command.* When setting beyond the area of movement is carried out, return “101” [CR] andthe command is not executed.Ex.1) When movement to right side has already reached limit; and "RIGHT" isreceived.Ex.2) When “LEFT”/”UP” is received at the default position.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.9.3 CF_SIMPLEMENU CommandCommand%1DetailsResponse“CF_SIMPLEMENU_%1” [CR]“ON” ----------------------------- Set Simple menu to On.“OFF” --------------------------- Set Simple menu to Off.Select Simple menu. (Valid only when in the normal Power ON status.)The status set by this command is stored in EEPROM and the setting remainseven after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)38/101
Page 1 and 2: DHD800 RS232 Codes-ExpandTechnical
Page 4 and 5: PDG-DHT8000L Expand Serial Command
Page 88 and 89:
PDG-DHT8000L Expand Serial Command
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102:
show all

Christie DHD800 Serial Communications Protocol-Extended

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?