Christie DHD800 Serial Communications Protocol-Extended

More documents

Recommendations

Info

PDG-DHT8000L Expand Serial Command Functional Specifications8.7 Screen Control Command8.7.1 CF_SCREEN CommandCommand%1DetailsResponse“CF_SCREEN_%1” [CR]Input isPC signalInput isVideo signalCommonin AV/PC“NORMAL” ---------------------- Select Normal mode“ZOOM” ------------------------- Select Zoom mode“TRUE” -------------------------- Select True mode“FULL” --------------------------- Select Full mode“CUSTOM” ---------------------- Select Custom mode“DZOOM□UP” ----------------- Expand image size by Digital Zoom“DZOOM□DN” ---------------- Compress image size by Digital Zoom“UP” ---- Select screen size with forward switching in possiblerange. (Normal → Zoom → True → Full →Custom → Normal → …)“DN” -- Select screen size with backward switching in possiblerange. (Normal →Custom →Full → True →Zoom → Normal → …)“NORMAL” ---------------------- Select Normal mode“ZOOM” -------------------------- Select Zoom mode“NATURAL” --------------------- Select Natural wide mode“FULL” --------------------------- Select Full mode“CUSTOM” -----------------------Select Custom mode“UP” ---- Select screen size with forward switching in possiblerange. (Normal → Zoom →Natural → Full →Custom → Normal → …)“DN” -- Select screen size with backward switching in possiblerange. (Normal →Custom →Full → Natural →Zoom → Normal → …)“RST” ---------------------- Reset Screen adjustmentSelect screen size. (Valid only when in the normal Power ON status.)When selected Input does not meet the requirement for the specified %1, return“101” [CR] and the command is not executed.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.7.2 CF_DZCENT CommandCommand“CF_DZCENT_%1” [CR]%1 “CENT” -------------------- Cancel Digital Zoom (CENT: “CENTER”)DetailsResponseCancel Digital Zoom mode. (Valid only when in the normal Power ON status andInput for Computer is selected.)AcceptableUnacceptable“000” [CR]“101” [CR] ----------------- When input is VideoDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)33/101
PDG-DHT8000L Expand Serial Command Functional Specifications8.7.3 CF_KEYSTONE CommandCommand%1DetailsResponse“CF_KEYSTONE _%1” [CR]“UP” ------------- Correct Keystone distortion to reduce upper part of image“FUP” ----------- Correct Keystone distortion to reduce upper part“DN” ------------- Correct Keystone distortion to reduce lower part of image“FDN” ----------- Correct Keystone distortion to reduce lower part largely“LEFT” ---------- Correct Keystone distortion to reduce left part of image“FLFT” ---------- Correct Keystone distortion to reduce left part largely“RIGHT” -------- Correct Keystone distortion to reduce right part of image“FRGT” --------- Correct Keystone distortion to reduce right part largely“RST” ------------ Set Keystone OFFChange level of Keystone distortion correction (Available only in the normal PowerON status).When reached the limit of the correction level, projector accepts the command butdoes not execute it.Receiving this command immediately invokes the operation.When trying to set the value beyond available range, error code “201” is returnedand the operation is not executed.Example 1: When the correction level of the right part has reached its upper limitand then the command “RIGHT” is receivedExample 2: When the upper part correction allows only another step, and then thecommand “FUP” is received.AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.7.4 CF_KEYSTONEMODE CommandCommand%1DetailsResponse“CF_KYSTNMODE _%1” [CR]“STR” --------- Set Keystone store mode to Store“RST” --------- Set Keystone store mode to ResetSet Keystone store mode (Available only in the normal Power ON status)AcceptableUnacceptable“000” [CR]“Error Code” [CR]8.7.5 CF_CEIL CommandCommand%1DetailsResponse“CF_CEIL_%1” [CR]“ON” --------------------------- Set Ceiling to ON“OFF” ------------------------- Set Ceiling to OFFSet/Cancel Ceiling. (Valid only when in the normal Power ON status.)When Ceiling is set to ON, image is left/right as well as top/bottom reversed.The status set by this command is stored in EEPROM and the setting remainseffective after the power is turned to ALL OFF status.AcceptableUnacceptable“000” [CR]“Error Code” [CR]DHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)34/101
Page 1 and 2: DHD800 RS232 Codes-ExpandTechnical
Page 4 and 5: PDG-DHT8000L Expand Serial Command
Page 84 and 85:
PDG-DHT8000L Expand Serial Command
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102:
show all

Christie DHD800 Serial Communications Protocol-Extended

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?