Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional SpecificationsCR_PIPSIZE[CR]CR_PIPFRAMELOCK[CR]CR_PIPSTORE[CR]CR_EDGEBLENDING[CR]CR_BLEND[CR]CR_BLENDBLK[CR]CR_BLENDTESTPAT[CR]CR_COLORMATCHING[CR]CR_CMMSXY_%1[CR]CR_CMMSL_%1[CR]CR_CMTGXY_%1[CR]CR_CMTGG_%1[CR]CR_CMAUTOTESTPAT[CR]CR_CMMSTESTPAT[CR]CR_CMTGTESTPAT[CR]CR_DYNAMICBLACK[CR]CR_HDMISETUP[CR]Get Menu size of “Picture in Picture”Get setting status of Frame lock of “Picture inPicture”Get stored status of “Picture in Picture”Get setting status of Edge blendingGet setting status of width of Edge blendingGet setting status of Black level of Edge blendingGet setting status of Test pattern of Edge blendingGet setting status of Color matchingGet “x”,”y” value of Measured of Color matchingGet “L” value of Measured of Color matchingGet “x”,”y” value of Target of Color matchingGet “g” value of Target of Color matchingGet setting status of Auto test pattern of ColormatchingGet setting status of test pattern(Measured) of ColormatchingGet setting status of test pattern(Target) of ColormatchingGet setting status of DynamicBlackGet setting status of HDMI setup6.8 Other Status Read Command TableStatus read commandItemCR_STATUS [CR]Get operation state of the projectorCR_SIGNAL [CR]Get status of signal existenceCR_VMUTE [CR]Get setting status of Video muteCR_FREEZE [CR]Get setting status of FreezeCR_PTIMER [CR]Get operating status of P-TimerGet temperature status whether it is close to abnormalCR_TEMPWARN [CR]level or notCR_TEMPFAIL [CR] Get temperature in abnormal temperature statusCR_TEMP[CR]Get current temperatureCR_SERIALNO [CR] Get value of Serial numberCR_SHUTCOND [CR] Get setting status of ShutterCR_OPTCTRLNO[CR] Get Option control No. of the projectorCR_LENSTYPE[CR] Get Lens type currently installedCR_COLWHEELTYPE[CR] Get Color wheel type currently installedDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)19/101