Christie DHD800 Serial Communications Protocol-Extended

PDG-DHT8000L Expand Serial Command Functional SpecificationsCR_SETPCADJ [CR] Get currently displayed signalCR_ORGMODE [CR] Get the original signal of the mode adjusted in PC Adj.CR_PCSTORE [CR] Get Free or Stored status for PC Adj. Mode 1-56.3 Video Status Read Command TableStatus read commandCR_SERSYS [CR]ItemGet currently selected signal. In Auto mode, it returns aresult by Auto detection.6.4 Input Status Read Command TableStatus read commandCR_INPUT [CR]CR_SOURCE [CR]CR_SYSTEM [CR]CR_SYSLIST[CR]CR-MODELIST[CR]Get selected InputGet selected SourceItemGet selected System in Video Input modeGet possible system listGet possible mode listCR_SRCINP1 [CR] Get selected source for Input 1CR_SRCINP2 [CR] Get selected source for Input 2CR_SRCINP3 [CR] Get selected source for Input 3CR_SRCINP4 [CR] Get selected source for Input 4CR_HMSLOT [CR]Get the total number of SlotsCR_NMSLOT1 [CR] Get a card name inserted to Slot 1CR_NMSLOT2 [CR] Get a card name inserted to Slott2CR_NMSLOT3 [CR] Get a card name inserted to Slot 3CR_NMSLOT4 [CR] Get a card name inserted to Slot 4CR_IDSLOT1 [CR] Get ID information of Slot 1CR_IDSLOT2 [CR] Get ID information of Slot 2CR_IDSLOT3 [CR] Get ID information of Slot 3CR_IDSLOT4 [CR] Get ID information of Slot 46.5 Screen Status Read Command TableStatus read commandItemCR_SCREEN [CR]Get selected screen sizeCR_KYSTNMODE[CR] Get selected Keystone store modeCR_CEIL[CR]Get selected ON/OFF of CeilingCR_REAR[CR]Get selected ON/OFF of RearCR_VSCALE[CR]Get setting status of V ScaleCR_VPOS[CR]Get setting status of V PositionCR_HSCALE[CR]Get setting status of H ScaleCR_HPOS[CR]Get setting status of H Position6.6 Lamp Status Read Command TableStatus read commandItemCR_LAMPREPL [CR]Get information on Lamp replacement timeCR_LAMPMODE [CR]Get selected Lamp modeCR_AUTOLAMPCONTROL[CR] Get setting status of dimmer function level.CR_LAMPSTS [CR]Get Lamp lighting statusDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)17/101