Christie DHD800 Serial Communications Protocol-Extended
Christie DHD800 Serial Communications Protocol-Extended Christie DHD800 Serial Communications Protocol-Extended
PDG-DHT8000L Expand Serial Command Functional SpecificationsCF_PIPMODEFREE_%1[CR]CF_PIPRST_%1[CR]CF_EDGEBLENDING_%1[CR]CF_BLEND_%1_%2[CR]CF_BLENDBLK_%1_%2[CR]CF_BLENDBLKALL_%1_%2[CR]CF_BLENDTESTPAT_%1[CR]CF_BLENDRST_%1[CR]CF_BLENDMENUOFF_%1[CR]CF_BLENDMENU_%1[CR]CF_COLORMATCHING_%1[CR]CF_CMMSXY_%1_%2_%3[CR]CF_CMMSL_%1_%2[CR]CF_CMTGXY_%1_%2_%3[CR]CF_CMTGG_%1_%2[CR]CF_CMAUTOTESTPAT_%1[CR]CF_CMRST_%1[CR]CF_CMSTORE_%1[CR]CF_CMMSTESTPAT_%1[CR]CF_CMTGTESTPAT_%1[CR]CF_CMFDEFAULT_%1[CR]CF_CMMENUOFF_%1[CR]CF_CMMENU_%1[CR]CF_DYNAMICBLACK_%1[CR]CF_HDMISETUP_%1[CR]CF_LOGO_%1[CR]CF_FANSPEED_%1[CR]CF_RCODE_%1[CR]CF_RSENS_%1[CR]CF_P-MANE_%1[CR]CF_P-MANETIME_%1[CR]CF_ON-STA_%1[CR]CF_PJPINCODE_%1[CR]CF_FILH_%1[CR]CF_FILTIMER_%1[CR]CF_FILCTL_%1[CR]CF_FILSCRL_%1[CR]CF_TESTPAT_%1[CR]CF_FDEFAULT_%1[CR]CF_KEYDIS_%1[CR]CF_SHUTRCPROT_%1[CR]CF_SHUTKEYPROT_%1[CR]CF_SHUTH_%1[CR]CF_SHUTEFFECT_%1[CR]CF_SHUTRELEASE_%1[CR]CF_DELAYCTRL_%1[CR]Delete the values registered in User %1 and return itto Free status.Reset setting of “Picture in Picture”Set Edge blendingSet width of Edge blendingSet Black level(R/G/B) of Edge blendingSet Black level(ALL) of Edge blendingSet Test pattern of Edge blendingReset Edge blendingSet Menu off of Edge blendingSelect display or erase Edge blending menu.Set Color matchingSet “x,y” value of Measured of Color matchingSet “L” value of Measured of Color matchingSet “x,y” value of Target of Color matchingSet “g” value of Target of Color matchingSet Auto test pattern of Color matchingReset Color matchingStore Color matchingDisplay Measured Test pattern of Color matchingDisplay Target Test pattern of Color matchingReturn color matching setting to Factory Defaultsetting.Set Menu off of Color matchingSelect display or erase Color matching menuSet DynamicBlackSet HDMI setupSet ON/OFF of LogoSelect Fan SpeedSelect Remote Control CodeSelect location of infrared remote receiver ofcontrolSet ON/OFF of Power ManagementSet time of Power ManagementSet ON/OFF of Power ON StartEnter PJ PIN code to cancel PJ lockremoteReset Filter used timeSet time to display Filter cleaning / replacementwarning on screenExecute operation of scroll of filterReset Filter scroll counterSet Test pattern display functionReturn the settings to Factory Default statusSet limitation of RC/KEY controlSet valid / invalid of RC use on Shutter controlfunctionSet valid / invalid use of key on the side panel onShutter control functionSet time of operating shutter management functionSet effect when opening/closing shutterSet release key of ShutterSet Video delay control functionDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)15/101
PDG-DHT8000L Expand Serial Command Functional SpecificationsCF_CCAPTIONDISP_%1[CR]CF_CCAPTIONCOLOR_%1[CR]CF_FRAMELOCK_%1[CR]CF_FRAMELOCKADJ_%1[CR]CF_FRAMELOCKRST_%1[CR]Set channel of Closed captionSet color of Closed captionSet Frame lock functionSet frame lock frequencyReset Frame lock setting5.7 Other Command TableExecute commandCF_KEYEMU_%1[CR]CF_MENU_%1[CR]CF_POWER_%1[CR]CF_FREEZE_%1[CR]CF_VMUTE_%1[CR]ItemControl RC/Panel key operation ofPointer(Right/Left/Top/Bottom)/SELECT/AUTO PCSet ON/OFF of MenuSet ON/OFF of PowerSet ON/OFF of FreezeControl Open/Close of Shutter6. Status Read Command Table6.1 Image Status Read Command TableStatus read commandItemCR_CONT [CR]Get value of ContrastCR_BRIGHT [CR]Get value of BrightnessCR_COLOR [CR]Get value of ColorCR_TINT [CR]Get value of TintCR_APCTRLGet setting status of Auto Picture ControlCR_COLTEMPGet value of Color temperatureCR_WBAL-R [CR]Get Red value of White BalanceCR_WBAL-G [CR]Get Green value of White BalanceCR_WBAL-B [CR]Get Blue value of White BalanceCR_OFFSET-R [CR] Get Offset RedCR_OFFSET-G [CR] Get Offset GreenCR_OFFSET-B [CR] Get Offset BlueCR_SHARP [CR]Get value of SharpnessCR_GAMMA [CR]Get value of GammaCR_NZRED [CR]Get setting status of Noise reductionCR_PROGV [CR]Get setting status of Progressive scanCR_BCOLOR [CR]Get setting status of BrilliantColorCR_IMAGE [CR]Get Selected Image statusCR_IMGGMD [CR]Get setting value of Image Gamma6.2 PC Status Read Command TableStatus read commandItemCR_FSYNC [CR]Get setting value of Fine SyncCR_TDOTS [CR]Get setting value of Total DotsCR_CLAMP [CR]Get setting value of ClampCR_H-POS [CR]Get setting value of Horizontal PositionCR_V-POS [CR]Get setting value of Vertical PositionCR_DDOTS [CR]Get setting value of Display DotsCR_DLINE [CR]Get setting value of Display LineDHD800 RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)16/101
- Page 1 and 2: DHD800 RS232 Codes-ExpandTechnical
- Page 4 and 5: PDG-DHT8000L Expand Serial Command
- Page 6 and 7: PDG-DHT8000L Expand Serial Command
- Page 8 and 9: PDG-DHT8000L Expand Serial Command
- Page 10 and 11: PDG-DHT8000L Expand Serial Command
- Page 12 and 13: PDG-DHT8000L Expand Serial Command
- Page 14 and 15: PDG-DHT8000L Expand Serial Command
- Page 18 and 19: PDG-DHT8000L Expand Serial Command
- Page 20 and 21: PDG-DHT8000L Expand Serial Command
- Page 22 and 23: PDG-DHT8000L Expand Serial Command
- Page 24 and 25: PDG-DHT8000L Expand Serial Command
- Page 26 and 27: PDG-DHT8000L Expand Serial Command
- Page 28 and 29: PDG-DHT8000L Expand Serial Command
- Page 30 and 31: PDG-DHT8000L Expand Serial Command
- Page 32 and 33: PDG-DHT8000L Expand Serial Command
- Page 34 and 35: PDG-DHT8000L Expand Serial Command
- Page 36 and 37: PDG-DHT8000L Expand Serial Command
- Page 38 and 39: PDG-DHT8000L Expand Serial Command
- Page 40 and 41: PDG-DHT8000L Expand Serial Command
- Page 42 and 43: PDG-DHT8000L Expand Serial Command
- Page 44 and 45: PDG-DHT8000L Expand Serial Command
- Page 46 and 47: PDG-DHT8000L Expand Serial Command
- Page 48 and 49: PDG-DHT8000L Expand Serial Command
- Page 50 and 51: PDG-DHT8000L Expand Serial Command
- Page 52 and 53: PDG-DHT8000L Expand Serial Command
- Page 54 and 55: PDG-DHT8000L Expand Serial Command
- Page 56 and 57: PDG-DHT8000L Expand Serial Command
- Page 58 and 59: PDG-DHT8000L Expand Serial Command
- Page 60 and 61: PDG-DHT8000L Expand Serial Command
- Page 62 and 63: PDG-DHT8000L Expand Serial Command
- Page 64 and 65: PDG-DHT8000L Expand Serial Command
PDG-DHT8000L Expand <strong>Serial</strong> Command Functional SpecificationsCF_CCAPTIONDISP_%1[CR]CF_CCAPTIONCOLOR_%1[CR]CF_FRAMELOCK_%1[CR]CF_FRAMELOCKADJ_%1[CR]CF_FRAMELOCKRST_%1[CR]Set channel of Closed captionSet color of Closed captionSet Frame lock functionSet frame lock frequencyReset Frame lock setting5.7 Other Command TableExecute commandCF_KEYEMU_%1[CR]CF_MENU_%1[CR]CF_POWER_%1[CR]CF_FREEZE_%1[CR]CF_VMUTE_%1[CR]ItemControl RC/Panel key operation ofPointer(Right/Left/Top/Bottom)/SELECT/AUTO PCSet ON/OFF of MenuSet ON/OFF of PowerSet ON/OFF of FreezeControl Open/Close of Shutter6. Status Read Command Table6.1 Image Status Read Command TableStatus read commandItemCR_CONT [CR]Get value of ContrastCR_BRIGHT [CR]Get value of BrightnessCR_COLOR [CR]Get value of ColorCR_TINT [CR]Get value of TintCR_APCTRLGet setting status of Auto Picture ControlCR_COLTEMPGet value of Color temperatureCR_WBAL-R [CR]Get Red value of White BalanceCR_WBAL-G [CR]Get Green value of White BalanceCR_WBAL-B [CR]Get Blue value of White BalanceCR_OFFSET-R [CR] Get Offset RedCR_OFFSET-G [CR] Get Offset GreenCR_OFFSET-B [CR] Get Offset BlueCR_SHARP [CR]Get value of SharpnessCR_GAMMA [CR]Get value of GammaCR_NZRED [CR]Get setting status of Noise reductionCR_PROGV [CR]Get setting status of Progressive scanCR_BCOLOR [CR]Get setting status of BrilliantColorCR_IMAGE [CR]Get Selected Image statusCR_IMGGMD [CR]Get setting value of Image Gamma6.2 PC Status Read Command TableStatus read commandItemCR_FSYNC [CR]Get setting value of Fine SyncCR_TDOTS [CR]Get setting value of Total DotsCR_CLAMP [CR]Get setting value of ClampCR_H-POS [CR]Get setting value of Horizontal PositionCR_V-POS [CR]Get setting value of Vertical PositionCR_DDOTS [CR]Get setting value of Display DotsCR_DLINE [CR]Get setting value of Display Line<strong>DHD800</strong> RS232 Codes-Expand Technical Ref.020-000582-01 Rev. 1 (11-2012)16/101